Steaming & Frothing; Cleaning After Each Use - Dualit Cino Instruction Manual & Guarantee

PRIMING -
CONTINUED
7 WAIT 8
WAIT
Wait for the machine to Once temperature is
warm up. The indicator reached, the indicator light
light will flash green until will turn solid blue and beep
temperature is reached. 3 times. The machine is now
Note: The machine may ready to steam.
whistle whilst pre-heating.
This is normal operation.
STEAMING & FROTHING
1 GETTING STARTED 2
Remove the red silicon nib Pour 75 - 230ml of cold
from the thermometer and clip semi-skimmed milk into the
onto the side of the jug. milk jug.
READY
ADD MILK 3 STEAMING MILK
To heat milk using steam,
leave the steam wand
positioned just under the
surface of the milk. Do not
move the jug.
08
STEAMING & FROTHING -
FROTHING MILK
4 5
To froth milk however, Turn the steam valve anti-
introduce air to the milk clockwise to start the flow
by slowly lowering the jug of steam. You will hear the
ensuring the nozzle remains pump operating, this is
under the surface of the milk. normal operation.
Tip: Do not exceed the steam graphic on the thermometer. After each use wipe the nozzle and flush
and descale regularly (see Cleaning and Care). Failure to do so will break the machine and invalidate
your warranty.

CLEANING AFTER EACH USE

IT IS IMPORTANT TO CLEAN THE DUALIT CINO
THE MACHINE IS SWITCHED OFF, UNPLUGGED AND ALLOWED TO COOL.
1 FLUSH 2
Flush the steam wand by Thoroughly wipe the steam
dispensing steam to remove wand to clean off any milk
any milk residue from inside residue with a damp cloth.
the steam wand after each use.
CONTINUED
START STEAMING TURN OFF
6
To stop steaming, turn the
steam valve clockwise to
the off position. Turn the
machine off using the off
switch and unplug.
TM AFTER EACH USE. MAKE SURE
WIPE 3 UNPLUG
Unplug the machine, and
allow to cool.
09