Table of Contents
Advertisement
OPERATING INSTRUCTIONS
START OPERATION
1. Place the product in
an
upright position on
a
flat,
stable, and
heat-resistant
surface.
Make
sure
there is nothing flammable or
heatsensitive within 39 in. Operating the product in
any other
position
could cause a
hazard.
2.
Insert the plug into
a suitable
wall
socket.
The dehumidifier is
suitable
for
operating
on
an electricity supply
having the
same
voltage
as
that
shown
on its
rating
label.
3. Make
sure
the water tank is correctly located
.
After
switching
on
the machine for the first time, if the
"Bucket
Full"
light illuminates,
pull out the water tank and
check
that the
"float"
lever is
able
to
move freely, then return the water tank to the correct position (Fig.
1).
WATER FULL INDICATOR LIGHT (RED)
Float lever
~
When the water tank is full and/or incorrectly positioned inside the cabinet, the water full red light
turns on and remains on until such time that the tank is emptied and/or correctly re-positioned
.
This
condition
will result in the immediate
shut down
of the dehumidifying
system
(both
compressor
and
fan motor operations
are
terminated). This is a
safety
feature. When the water tank is
emptied
and/or correctly re-positioned, the dehumidifier will resume operation automatically.
NOTE:
It may take
several
minutes before operating conditions resume
.
BUCKET FULL LIGHT
• When the water tank is full the machine will stop and
the"
Bucket
Full" light will illuminate.
• The water tank should be carefully removed from the machine by
sliding
it outward from the front of the unit
and
it
should
be
emptied
.
When the
empty
tank is replaced properly in the machine, the unit
will
start
up
and
run normally
(Fig.
2)
.
NOTE: Please use both hands to carefully empty the water
tank.
FACTORY DEFAULT SETTING
Humidity Setting: 30%
Fan Speed: Low
NOTE: In the
event
of
a
power failure, the unit will default to the last program
setting
that was used
when power is restored
(does
not include TIMER setting)
.
WATER TANK OPERATION
Proper installation of the water tank is crucial in maintaining reliable dehumidifier operation. The
water tank holds
accumulated condensed
water
and,
by means of
a safety switch, controls
both
the water level and operation of the dehumidification process. When the water tank is full and/or
accidentally displaced inside the cabinet, the float switch actuator (inside the tank) breaks contact
with the
safety switch.
This condition results in the immediate
shut
down of the compressor
and
fan
motor
system,
preventing moisture from being condensed.
NOTE: Never tamper with or attempt to defeat the water level
(safety)
float switch system.
10
~
AeonAir.com
AeOnJ,l,1fr"'
Hide quick links:
Advertisement
Table of Contents
