Motorola PRIVACY PLUS B5 Operating Instructions Manual page 33

1 2 3
D E F
AB C
4 5 6
GHI MNO
JKL
7 8 9
P R S TUV W X Y
0
HOME
31 Trunked Radio Features Operation
(cont.)
Trunked Telephone Operation (cont.)
Making a Telephone Call Using the Keypad
(Model B7 Only)
1. Press the phone button (normally the orange top
button). The display shows the last telephone
number dialed. The new telephone number can
now be entered from the keypad, using any of
the numeric (0 – 9) keys, as well as the "*" and
"#" keys. You can also enter a pause in the
telephone number by first pressing the "*" key,
then the "#" key. The pause will be shown on the
display as a "P."
2. Enter the telephone number. The display shows
the digits as they are being entered.
Note: With buffered dial, once you have started
entering numbers, the left arrow key (
function as a backspace key. Pressing this key
will erase the last digit entered, and move the
cursor to the left. When the last digit on the
display has been erased, an additional press of
this key will cause the last member of the
preprogrammed telephone list to be displayed;
pressing the right arrow key will show the first
member of the list.
3. When you have completely entered the number,
press the PTT button to send out the number.
The display shows "PLEASE WAIT" while your
radio attempts to access the telephone system.
If the access was successful, you will hear a dial
tone, and the display will again show the number.
4. The telephone number will be sent out. You will
hear either a busy signal or ringing.
) will