GE 162D9617P004 Owner's Manual page 12

Profile models 24 built-in style, 28 and 30
Table of Contents

Advertisement

Available languages

Available languages

About storage drawer removal.
Not all features are on all models.
Drawer
Guides
When replacing the drawers, make
sure you slide them through both
drawer guides on the right side.
About the refrigerator doors.
When the door is only partially open
it will automatically close.
Beyond this stop the door will
stay open.
12
Drawer Removal
Drawers can easily be removed by
tilting up slightly and pulling past
the stop location.
Remove the door bins from the fresh food door
before removing the drawer.
To remove the shelf above the top
drawer, first remove the top drawer
and any food on the shelf. Then tilt the
shelf up at the front and lift it up and
out of the tracks.
Refrigerator Doors
The refrigerator doors may feel
different than the ones you are used
to. The special door opening/closing
feature makes sure the doors close all
the way and are securely sealed.
When opening and closing the door
you will notice a stop position. If the
door is opened past this stop point, the
door will remain open to allow you to
load and unload food more easily.
When the door is only partially open
it will automatically close.
To replace the shelf, raise the shelf
front slightly and place the top hooks
in the lowest large track slots. Then
lower the front of the shelf until it is
level.
To remove the drawers when the fresh
food compartment door cannot be
opened fully you need to roll the refrig-
erator forward until the door can be
fully opened. In some cases this will
require moving the refrigerator to the
left as you roll it out.
The resistance you feel at the stop
position will be reduced as the door
is loaded with food.

Advertisement

Table of Contents
loading

Table of Contents