Download Print this page
Samson TCM-3 Instruction Manual
Samson TCM-3 Instruction Manual

Samson TCM-3 Instruction Manual

Cd/cd-r/cd-rw/mp3 player with pll mw/fm radio, radio data system

Advertisement

Quick Links

Model : TCM-3
Instruction Manual
CD/CD-R/CD-RW/MP3 Player
with PLL MW/FM Radio,
Radio Data System

Advertisement

loading

Summary of Contents for Samson TCM-3

  • Page 1 Model : TCM-3 Instruction Manual CD/CD-R/CD-RW/MP3 Player with PLL MW/FM Radio, Radio Data System...
  • Page 2: Locations Of Controls

    Drawings LOCATIONS OF CONTROLS 1. POWER ON/OFF 2. FUNCTION SELECT BUTTON 3. VOL UP/VOL DOWN 4. MODE BUTTON 5. AF FUNCTION (ALTERNATIVE FREQUENCIES) 6. BAND BUTTON (BND) 7. AUTO SEEK SEARCH TUNING (AS/PS) 8.9. AUTOMATIC OR MANUAL TUNING (FREQ UP OR FREQ DOWN / CD TRACK/SEARCH BUTTON...
  • Page 3: Mounting Example

    Installation MOUNTING EXAMPLE ACCESSORIES 1. ANTENNAE *1 2. 6PINCONNECTORWIRE *1 3. INSTRUCTIONMANUAL 4. ANTENNAESOCKET*1 5. SCREW*4 FRONT 6. SCREW*2 SIDE 7. SCREW*2 ANTENNAE SOCKET...
  • Page 4 Operation OPERATING INSTRUCTIONS 1. POWER ON/OFF By pressing this key (1), the unit is switched on and off. This unit is turned on by pressing any key. 2. SELECT (SEL) 3. VOLUME KNOB Rotate Volume up/down knob to control the VOLUME to select other functions, press the SEL (2) button shortly until the desired functions is shown on the display.
  • Page 5 (3)RETUNE L/S When press the SEL button for more than 2 seconds, it is activated as selecting mode of these function. (4)MASK DPI (2) When press the SEL button for more than 2 seconds, it is activated as selecting mode of these function.
  • Page 6 -Regional mode OFF The regional code in the format of PI code is ignored when AF switching or PI SEEK is implemented. 6. BAND BUTTON (BND) Each band is toggled cyclically by pressing this key FM1-FM2-FM3-MW1-MW2. 7. AUTO SEEK SEARCH TUNING (AS/PS) By pressing shortly, the radio searches for each preset Station.
  • Page 7 continually repeated until the Track Repeat mode is cancelled by pressing RPT button (15) again. 16. RANDOM BUTTON (RDM) When this button is pressed, RDM indication is displayed and each track of the disc are played in random instead of normal progression. To cancel RANDOM mode, press RDM button (16) again.
  • Page 8 Specification SPECIFICATIONS FM SECTION Frequency range 87.5-108.0MHz Channel step 50 KHz Intermediate frequency 10.7MHz Sensitivity 2uV at 30 dB S/N Signal to noise radio >60dB MW SECTION Frequency range 522-1620KHz Channel step 9 KHz Intermediate frequency 450KHz Sensitivity 30 dB Signal to noise radio >50dB CD/MP3/WMA PLAYER SECTION...