Basic Playback; Disc Playback - Toshiba 19LV610U-T Owner's Manual

Basic playback

Disc playback

This section shows you the basics on how to play a disc.
About
The
the kind of disc that can employ the function described
under that heading.
DVD
Basic playback
VCD
CD
N
Press POWER on the unit or on the remote
control.
POWER
The POWER indicator on the front of the unit
changes to green. It may take approximately
10 seconds for a picture to appear on-screen.
When using an amplifier, switch on the amplifier.
O
Press TV/DVD on the remote control to switch to
DVD mode.
The DVD startup screen will appear on-screen.
TV/DVD
P
Hold the disc by its edges and load it in the disc
slot with the label side facing forward.
Important: DO NOT touch the surface of the disc.
This may leave a smudge that can cause playback
errors.
The prompt "Insert Disc" changes to "Reading" and
then playback starts.
If the disc has its own menu, it will be displayed
on-screen. Press
navigate the disc menu, then press ENTER to
implement the selected menu option.
52
Downloaded from www.Manualslib.com
= =
= = icons on the heading bar indicate
You can use this function with DVDs.
You can use this function with video CDs.
You can use this function with audio CDs and
CD-R/RW discs.
POWER
Reading
/ / / on the remote control to
manuals search engine
EJECT
VOLUME +/-
VOLUME
PLAY
PLAY
CHANNEL
STOP
STOP
MENU
INPUT/ENTER
POWER
POWER
To adjust playback volume, press VOL + / –.
VOL
To temporarily suspend disc playback (still mode),
press PAUSE.
PAUSE
To continue playback from still mode, press PLAY.
PLAY
To stop playback, press STOP.
STOP
Playback resume function
Your TV/DVD supports playback resume function. If you
stopped the disc playback before it is completed, the unit
records the stop point. " " appears on-screen. Press
PLAY to resume playback on the previous stop point. If
you press STOP twice in quick succession or unload the
disc, the unit will clear the stop point.
Higher quality picture
High resolution pictures on some discs may occasionally
cause noise on the picture display. If this is the case,
reduce the "Sharpness" setting under the "Picture
42
Setting" menu (see page ).
Notes:
• Keep your fingers well clear of the disc slot when a disc
is loading or unloading. Failure to do so may cause
serious personal injury.
• Do not move the unit during playback. Doing so may
damage the disc.
• When a disc is inserted when the TV is not in DVD
mode, the unit will automatically switch to DVD mode.
TV/DVD
POWER
VOL +/–
ENTER
PLAY
STOP
PAUSE