Table of Contents
Advertisement
MENU GUIDE
II. Installation
II-2. DiSEqC Switch
1. Select Channel Search in Installation using ▲▼
and press OK.
a) If you select DiSEqC Switch and press OK on the menu,
DiSEqC Switch Page will be displayed.
b) Select the proper Satellite of each DiSEqC port using
◀ ▶ and ▲▼ and press SEARCH. Selected Satellites
will be searched automatically.
II-3 Motor Setup
1. You can move the cursor using ▲▼ and press
OK when you select the value that you want.
a) Motor Type : DiSEqC 1.2, USAL
- Press OK to display Motor Type
- Select the proper Motor Type and then press OK.
b) Satellite
- Press OK to Display the Satellite List Box
- Select the proper Satellite and then press OK.
c) Switch & LNB
- Press OK to Display the LNB frequency list or Switch
Setting
- Select proper LNB & proper Switch.
d) Frequency
- Press OK to Display the Frequency List.
- Select the proper Frequency and then press OK.
e) Motor Movement
- Search the appropriate position of the selected Satellite
using ◀ ▶.
16
MENU GUIDE
II. Installation
II-3 Motor Setup
f) Motor Control
Select the position using ◀ ▶ and then press OK.
Message box displays on the screen.
- Store Sat position : Stores the current position of the
- Goto Sat Position : Moves the motor to the stored posi-
- Goto 0 : Goes to the center of the motor.
- Reset Position : Resets all stored position of the motor.
g) Satellite Position
- Input directly the position using NUMBER KEY on the RCU
- Select the direction using ◀ ▶ (WEST / EAST).
h) Search Option
- Press OK to display the Search Option list.
- Select the Search Option that you want and then press OK.
2. Edit my local position
- Press Green Button to edit local Position.
a) Longtitude
- Input directly the Longtitude using NUMBER KEY on
the RCU.
- Select the direction using ◀ ▶ (WEST / EAST).
3. Press EXIT to return to the previous menu or press MENU to go to the current live channel.
II-4 Factory Default
Use Factory Default function only when you want
to return the receiver to the condition of factory
default. All settings and channels will be deleted.
a) Select Factory Default in Installations using ▲▼ and
press OK.
b) Message box displays on the screen.
b) Select OK to return the receiver to the condition of fac-
tory default and then press OK.
b) Press EXIT to return to the previous menu or press
MENU to go to the current live channel.
User's Manual
User's Manual
motor for the selected satellite.
tion of the selected satellite.
◈TP EDIT
To Edit TP Press the RED button on the
RCU.
i) Search
- Press Search to start scan channels.
- Press OK to start scanning.
b) Latitude
- Input directly the Latitude using NUMBER KEY on the
RCU.
- Select the direction using ▲▼ (NORTH / SOUTH).
17
Advertisement
Table of Contents
