Download Print this page
Rheem RHWB series Instruction Manual

Rheem RHWB series Instruction Manual

Home heating & water heating

Advertisement

Quick Links

RHEEM RESIDENTIAL TANKLESS
84 TANKLESS SERIES
Continuous hot water for 2-3 bathroom homes*
RTG-84DV indoor direct vent and RTG-84X outdoor
natural and LP models – 11,000 - 180,000 BTU max.
8.4 gal./min at 35° F rise max., 6.7 gal./min. at 45° F rise
Limited Warranty:
12-Year on heat exchanger, 5-Year on parts, 1-Year on labor
See Residential Warranty Information Brochure for complete warranty information.
New! 3"/5" Concentric Vent System with Integrated Condensate Collector
Connects to Metal Fab Inc., 3"/5" Concentric Venting without an adapter
New! Next Generation Burner Technology
Industry Best! .26 GPM Minimum Flow Rate, .40 GPM Minimum
Activation Flow Rate
UMC-117 remote control and 10 ft. of thermostat wire is included
EZ-Link™ cable available for high demand applications to connect two tankless
units to operate as one
New! Manifold up to 6 units with an optional MIC-6 manifold control board
Exclusive! All Rheem models can be linked in up to 20 unit manifold installations
by using the optional MIC-180 and MICS-180 manifold control assembly
High-altitude capability – up to 9,840 ft. elevation above sea level
(no chip required)
Exclusive! Guardian OFW™ overheat film wrap
All Rheem tankless models are third-party efficiency certified by GAMA
Continuous hot water, energy saving and compact, space saving design
Intelligent electronic controls designed to increase energy efficiency and safety
Self Diagnostic System
Digital display shows temperature setting and maintenance codes
Built-in electric blower
Supplied with a 120 volt power cord
Environmentally friendly Low NOx burner meets SCAQMD rule 1146
requirements
Freeze protection to -30° F
Product appearance may differ.
* Based on simultaneous showers using 2.5 gallons per minute. Flow rates vary depending
on temperature of cold water supply.
The 84 Series Tankless models can be
AIR HANDLER MODEL:
converted for Commercial Installations
See Commercial Warranty Brochure for details.
RHWB- Series
Tankless water heaters
INSTALLATION INSTRUCTIONS
• Nominal Heating Capacities from
32,000 to 90,000 BTUH [9.38 to 26.39 kW]
HYDRONIC AIR HANDLER
RHWB-
See reverse for specifications.
TANKLESS WATER HEATER MODELS:
RTG-64DV indoor direct vent and RTG-64X outdoor
• Natural and LP models – 11,000 - 150,000 BTU max.
• 6.4 gal./min at 35° F rise max., 5.6 gal./min. at 45° F rise
RTG-84DV indoor direct vent and RTG-84X outdoor
• Natural and LP models – 11,000 - 180,000 BTU max.
• 8.4 gal./min at 35° F rise max., 6.7 gal./min. at 45° F rise
RTG-95DV indoor direct vent and RTG-95X outdoor
• Natural and LP models – 11,000 - 199,900 BTU max.
• 9.5 gal./min at 35° F rise max., 7.4 gal./min. at 45° F rise
ISO 9001:2008
INTEGRATED HVAC
& WATER HEATING
180,000 BTU
INDOOR DIRECT VENT
INSTALLATION INSTRUCTIONS
HYDRONIC AIR HANDLER
180,000 BTU
OUTDOOR
RHWB-
Continuous hot water
ISO 9001:2008
DO NOT DESTROY THIS MANUAL. PLEASE READ CAREFULLY AND KEEP
IN A SAFE PLACE FOR FUTURE REFERENCE BY QUALIFIED SERVICE PERSONNEL.
DO NOT DESTROY THIS MANUAL. PLEASE READ CAREFULLY AND KEEP
IN A SAFE PLACE FOR FUTURE REFERENCE BY QUALIFIED SERVICE PERSONNEL.
HOME HEATING & WATER HEATING
POWERED BY TANKLESS TECHNOLOGY
Features of the Hydronic Air Handler
• Low profile 34-inch design is lighter, easier to handle and leaves
room for optional accessories
• Left or right side electric connections
• Integrated control board features diagnostics, manages all opera-
tional functions and provides hookups for humidifier and electronic
air cleaner
• An insulated blower compartment makes it one of the quietest
hydronic air handlers on the market today
• Pre-paint galvanized steel cabinet
• Molded permanent filter(s)
• Transformer and control fuse protection
• Solid bottom is standard
• A variety of cooling coils and plenums designed to use with the
Hydronic Air Handler are available as optional accessories for air
conditioning models
Features of the Tankless Water Heater
• Industry best! Minimum flow rate of .26 GPM, minimum activa-
tion flow rate of .40 GPM
• 3"/5" concentric vent system with integrated condensate
collector
• Connects to Metal-Fab, Inc., 3"/5" concentric venting without an
adapter
• Next generation burner technology
• UMC-117 remote control and 10 ft. of thermostat wire is included
• EZ-Link™ cable available for high demand applications to connect
two tankless units to operate as one
• High-altitude capability – up to 9,840 ft. elevation above
sea level (no chip required)
• Intelligent electronic controls designed to increase energy
efficiency and safety
• Self Diagnostic System
92-24161-94-00
92-24161-94-00

Advertisement

loading
Need help?

Need help?

Do you have a question about the RHWB series and is the answer not in the manual?

Questions and answers

Summary of Contents for Rheem RHWB series

  • Page 1 New! Manifold up to 6 units with an optional MIC-6 manifold control board • Exclusive! All Rheem models can be linked in up to 20 unit manifold installations by using the optional MIC-180 and MICS-180 manifold control assembly • Pre-paint galvanized steel cabinet 180,000 BTU •...
  • Page 2: System Components

    STANDARD EQUIPMENT OPTIONAL EQUIPMENT Rheem Heating, Cooling and Water Heating Completely assembled and wired; Hydronic coil; copper tubes with aluminum Side and bottom filter racks; return air cabinet for all sizes. fins; blower compartment door safety switch; solid state time on/off blower control;...
  • Page 3: Model Number Nomenclature

    Series Size Designation Inlet Water Output Temp = 150F BTU/HR R = Rheem H = Air handler W = Water B = 2nd Series 60,000 M = 11x7 P = PSC 48 = 1500-1700 CFM A = Rev 0 80,000...
  • Page 4 *A service clearance of at least 24 inches is recommended in front of all air handlers. 10WR [622] [593] [575] 22 [600] [528] 1 [25] 2 [51] [ ] Designates Metric Conversions Rheem Heating, Cooling and Water Heating Rheem Heating, Cooling and Water Heating...
  • Page 5 IMPORTANT: Always check air temperature rise after changing the heating speed for any reason. Rheem Heating, Cooling and Water Heating...
  • Page 6: Specifications

    • New! Manifold up to 6 units with an optional MIC-6 manifold control board • Exclusive! All Rheem models can be linked in up to 20 unit manifold installations by using the optional MIC-180 and MICS-180 manifold control assembly •...
  • Page 7 New! Manifold up to 6 units with an optional MIC-6 manifold control board • Exclusive! All Rheem models can be linked in up to 20 unit manifold installations by using the optional MIC-180 and MICS-180 manifold control assembly 180,000 BTU •...
  • Page 8 New! Manifold up to 6 units with an optional MIC-6 manifold control board • Exclusive! All Rheem models can be linked in up to 20 unit manifold installations by using the optional MIC-180 and MICS-180 manifold control assembly 199,900 BTU •...
  • Page 9 RXAA-C177 RXAL-B25BU [622] [549] RXAA-C187 RXAL-B21BU [ ] Designates Metric Conversions [ ] Designates Metric Conversions TANKLESS WATER HEATER ACCESSORIES Visit RheemTankless.com for a current listing of Rheem Tankless accessories. Rheem Heating, Cooling and Water Heating Rheem Heating, Cooling and Water Heating Rheem Heating, Cooling and Water Heating...
  • Page 10 TYPICAL PIPING ARRANGEMENT FOR DIRECT SPACE HEATING AND DOMESTIC WATER SUPPLY WITH TANKLESS (BV) All piping to be 3/4 inch. (DV) Evaporator Coil Air Separator Flow Switch Rheem Heating, Cooling and Water Heating...
  • Page 11 Rheem Heating, Cooling and Water Heating...
  • Page 12 Federal, State, Provincial, and Local codes, regulations, and practices. P.O. Box 17010, Fort Smith, AR 72917 “In keeping with its policy of continuous progress and product improvement, Rheem reserves the right to make changes without no tice.” PRINTED IN U.S.A. 04-10 DC FORM NO.