Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for MasterCraft Air-Powered Gravity-Feed
Summary of Contents for MasterCraft Air-Powered Gravity-Feed
- Page 1 INSTRUCTION MANUAL AIR-POWERED GRAVITY- FEED SPRAY GUN KIT 058-9311-0...
- Page 2 QUICK START GUIDE TECHNICAL SPECIFICATIONS 2–3 SAFETY GUIDELINES 4–9 KEY PARTS DIAGRAM 10–11 IMPORTANT INFORMATION 12–13 OPERATING INSTRUCTIONS 14–19 MAINTENANCE 20–22 TROUBLESHOOTING 23–25 EXPLODED VIEW & PARTS LIST 26–29 WARRANTY 30–31 AIR-POWERED GRAVITY-FEED SPRAY GUN KIT 058-9311-0...
- Page 5 PERSONAL SAFETY These precautions are intended for the personal safety of the user and others working with the user. Please take time to read and understand them. AIR-POWERED GRAVITY-FEED SPRAY GUN KIT 058-9311-0...
-
Page 6: Safety Guidelines
Allow the parts to cool down before handling or servicing. Keep children away from the compressor at all times. AIR-POWERED GRAVITY-FEED SPRAY GUN KIT 058-9311-0... - Page 7 Use compressed air at regulated pressure. Always use clean, dry, and compressed air at the regulated pressure. Do not exceed the maximum operating pressure of 80 PSI. Failure to comply will lead to serious injury or loss of life. MC-OM-06 AIR-POWERED GRAVITY-FEED SPRAY GUN KIT 058-9311-0...
- Page 8 Do not operate the compressor on a rooftop or in elevated position that could allow the unit to fall or be tipped over. • Always replace a damaged gauge before operating the unit again. AIR-POWERED GRAVITY-FEED SPRAY GUN KIT 058-9311-0...
- Page 9 Air-powered tools are loud and the sound can cause hearing damage. Always wear ear protection to help prevent hearing MC-OM-01 damage and loss. Failure to comply may result in moderate injury. AIR-POWERED GRAVITY-FEED SPRAY GUN KIT 058-9311-0...
- Page 12 Filter paper...
- Page 13 ® This Mastercraft Air-powered Gravity-feed Spray Gun is an HVLP or high-volume low-pressure sprayer. This tool applies paint with less force, reducing the bounce of the material from the surface to be painted. It features a stainless steel needle and nozzle to accommodate a variety of coatings.
- Page 14 Rotate the paint adjusting knob in a counterclockwise direction and open the knob when the gun is not in use. This will reduce spring tension on the needle fluid tip. • Clean the Air-powered Gravity-feed Spray Gun thoroughly and slightly lubricate it after using and before storing. CAUTION! Potential hazard that may result in moderate injury or damage to equipment.
- Page 15 WARNING! Potential hazard that could result in serious injury or loss of life. • Do not exceed the maximum pressure for the Air-powered Gravity-feed Spray Gun or any other parts in the compressor system. • Never aim or spray at yourself or anybody else. Failure to comply could result in serious injury or loss of life.
- Page 20 4. Trigger releasing position 5. Stroke stopping position 6. Gun movement path Note: Two proper and uniform thin coats of paint, rather than one thick layer, will yield better results and have less chance of runs. AIR-POWERED GRAVITY-FEED SPRAY GUN KIT 058-9311-0...
-
Page 24: Troubleshooting
1. Tighten or replace fluid nozzle. 1. Fluid nozzle is worn or loose. 2. Paint has build up on air cap. 2. Remove obstructions from holes, but don’t use metal objects to clean it. MC-OM-09 AIR-POWERED GRAVITY-FEED SPRAY GUN KIT 058-9311-0... - Page 25 1. Reduce the air pressure. 2. Work surface is too far. 2. Adjust to proper distance. Excessive overspray 3. Improper stroking (arcing, gun motion 3. Move at moderate pace, parallel to work are too fast). surface. AIR-POWERED GRAVITY-FEED SPRAY GUN KIT 058-9311-0...
- Page 26 2. Fluid control is not properly opened. 2. Open the fluid control. No spray 3. Fluid is too thick or heavy. 3. Thin the fluid or change to pressure feed system. Note: For further repair information, please call 1-800-689-9928. AIR-POWERED GRAVITY-FEED SPRAY GUN KIT 058-9311-0...
- Page 30 Fluid nozzle Snap retainer Fluid nozzle washer Pattern adjustment seat Screw Gun body Needle washer Air inlet plug If any parts are missing or damaged, if you have any questions, please call 1-800-689-9928. AIR-POWERED GRAVITY-FEED SPRAY GUN KIT WITH ACCESSORIES 058-9311-0...
- Page 31 This warranty will not apply where damage is caused by repairs made or attempted by others (i.e., persons not authorized by the manufacturer). This warranty will not apply to any product that was sold to the original purchaser as a reconditioned or refurbished product (unless otherwise specified in writing). AIR-POWERED GRAVITY-FEED SPRAY GUN KIT 058-9311-0...
- Page 32 This warranty gives you specific legal rights, and you may have other rights, which may vary from province to province. The provisions contained in this warranty are not intended to limit, modify, take away from, disclaim, or exclude any statutory warranties set forth in any applicable provincial or federal legislation. AIR-POWERED GRAVITY-FEED SPRAY GUN KIT 058-9311-0...
Need help?
Do you have a question about the Air-Powered Gravity-Feed and is the answer not in the manual?
Questions and answers