Rear Floor Storage Cover - Opel 2016 Insignia Owner's Manual

Table of Contents

Advertisement

Removing cover
Open the load compartment cover.
Pull the release lever on the right side
up and hold it. Lift the cover first on
the right side and remove from
retainers.
The removed cover can be stored
under the load compartment floor
3 78.
Installing cover
Insert the left side of the load
compartment cover in the recess, pull
the release lever up and hold it, insert
the right side of the load compartment
cover and engage.
Blind in the tailgate
To cover the load compartment
completely, mount the blind at four
fixing points on the inside of the
tailgate.

Rear floor storage cover

Sliding floor cover (FlexFloor)
For a convenient setting of the load
compartment, the floor cover can be
pulled out.
Storage
Pulling out the floor cover
● Raise the floor at the handle
slightly until the spring rolls pop-
up on each side.
● Press the button under the
handle and pull out the floor
cover until it engages.
Load the floor in this position.
Sliding back into load compartment
● Press the button under the
handle and slide in the floor cover
until it engages at the end
position.
Leave the floor cover in the
raised position as long as it is
loaded.
75

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents