Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Optoma WPS Pro
- Page 1 WPS Pro User manual...
-
Page 2: Table Of Contents
Table of Contents Overview ................................4 Package Contents ............................... 5 USB Token Contents ............................5 Physical Details ..............................5 What You Might Need ............................6 Quick Installation ..............................7 WPS Start/Standby Page............................ 8 Quick Guide / User-List ............................8 Screen Saver ..............................8 DoWiFi for Windows ............................ - Page 3 Change Passwords ............................ 41 10.4.6 Reset to Default ............................42 10.4.7 Firmware Upgrade ............................. 42 10.4.8 WebSlides Setup ............................43 10.4.9 Reboot System ............................44 10.4.10 Logout ..............................44 10.5 WebSlides ................................ 45 11 Appendices ................................46 11.1 Optoma Global Offices ............................. 47...
-
Page 4: Overview
Overview WPS Pro is professional wireless presentation gateway. By enabling the Revolutionary “interactive” and “wireless” functions, you can throw your presentations wirelessly from a PC, Mac, iPad, iPhone, or Android devices to a projector! And use your pad, tab or phone to control your PC/Mac, or view the presenting slides! -
Page 5: Package Contents
Package Contents WPS Pro Box WPS Pro USB Token Power Adapter (DC +5V, 2.6A) WiFi Antenna x 2 Wall-mount kit Basic user manual USB Token Contents Windows Installer (WPS Windows Installer) Mac Installer (WPS Mac Installer) ... -
Page 6: What You Might Need
Rear Panel USB Port VGA Connector HDMI Audio Jack RJ-45 Power Jack Antenna Description Antenna WiFi Antenna USB Port (Rear) USB port for USB IWB device (HID type) RJ-45 10/100M RJ-45 port VGA Connector VGA connector HDMI HDMI Connector Audio Jack Audio Jack (3.5mm) Power Jack... -
Page 7: Quick Installation
4) Insert the USB mouse or keyboard to WPS Pro front/rear USB port for On-Screen Display (OSD) control. (Optional) 5) Insert the USB IWB/Touch Screen cable to WPS Pro rear USB port for IWB remote touch control if needed. (Please noted that the front 2 USB ports do not support UoIP function). -
Page 8: Wps Start/Standby Page
2) It will show the Quick Guide Information, WiFi Network Name, IP Address and Code on standby screen. 3) If there is sender connected to WPS Pro device, it will show the User-List on standby screen, conference moderator can use the USB mouse to select the User and control it remotely. -
Page 9: Dowifi For Windows
DoWiFi for Windows (Do Not Support Windows Phone, Windows RT) Install the application 1) Make sure your PC WiFi is enabled already, and connect your PC to WPS box through WiFi. You can find the WiFi name of your WPS box information on the start/standby page. 2) Launch your browser and enter the Device Host Name (SSID) or IP address in the browser. -
Page 10: Start The Application
4) When the download is completed, follow the WPS Setup wizard to execute the software. (Make sure your Wifi have connected to WPS and your PC’s personal firewall allows WPS software to pass through.) Start the application 1) Click WPS icon on desktop to execute the application, or launch the application from USB token directly. -
Page 11: Connect To Wifi Network
192.168.100.10 2) If you want to connect to another WPS receiver, please press the “Rescan” button. Connect to WiFi Network 1) WPS application will search the available WiFi Network and list the WPS WiFi Device. You can select a network and press the “Connect”... -
Page 12: Connect To Receiver Device
3) If you don’t like to change the WiFi Network and want to keep the connection to current network, you can press the “Skip” button. Connect to Receiver Device 1) WPS application will search and list the WPS receiver Device. You can select the target receiver device and press “OK”... -
Page 13: Login
Login 1) When connecting to a “Code” protection enabled WPS receiver, you have to enter the “Code” and press the “Connect” button to login the receiver. (You can find the CODE from the OSD standby screen or right-upper corner of start screen) (Enter the code into the circled area) 2) If you want to connect to another receiver or cancel the login, please press the “Cancel”... -
Page 14: Login Code
Button Description Full Screen projection (Support audio projection) Project to Split #1 (Support audio projection) Project to Split #2 (No audio projection) Project to Split #3(No audio projection) Project to Split #4(No audio projection) Stop projecting Pause projecting Enable the Magnifier function Note: button, the new user’s screen When projecting in full screen projection, if another user is clicking on the play... -
Page 15: Show Receiver Information
2) You can click on the below function for extending menu to choose one to suit your needs. Function Select Projection Desktop Projection Quality Projection Mode Resolution Setting Projection Aspect Ratio 3) The below items are checked as default setting. You can uncheck them to suit your needs. Item Advanced Screen Capture Send Audio to Display... -
Page 16: Launch Sidepad
8.10.4 Launch SidePad Introduction: MirrorOp Receiver is an application to allow the user to connect Pad/Smartphone (Android and iOS), PC, and display/projector via WPS device. User can then control the projecting PC via Pad/Smartphone. Please refer to the below image for more information. MirrorOp Receiver Control for Android/iOS device. -
Page 17: Launch Webslides
If there is no Smartphone/Pad device detected after clicking on “Launch SidePad” the below image will show up. 8.10.5 Launch WebSlides Introduction: Webslides is an application to allow the user/presenter to broadcast the projecting screen/slides to allow multiple login users to receive the slides during a presentation and save the slides for note taking later. Note: Webslides is not available when Quad view is in use. -
Page 18: Select Projection Desktop
Users can put the mouse/finger on each button to get the “tip window” for the function of each button. Note: The WPS logged-in user is not identical to WebSlides user, and they both consume the wireless bandwidth for device connection. If there are more than 10 users logged into WPS, it is recommended to connect WPS to company network through Ethernet or bridge WPS to a router due to wireless bandwidth concern. -
Page 19: Projection Mode
8.10.8 Projection Mode 1) Click on “Select Projection Mode”, choose the Presentation mode for shortest latency or the Video mode for auto-latency control to have better video performance. 8.10.9 Resolution Settings 1) Click on “Resolution Setting”, choose “Never Change” to keep original desktop resolution, “Always Change” to change resolution automatically according to application’s recommendation, or “Always ask me”... -
Page 20: Send Audio To Display
Tip windows is not shown in projector Enable “Advanced Screen Capture”. Tip windows is shown in projector 8.10.13 Send Audio to Display 1) Click on “Send Audio to Display” to start the audio projection feature. It will mute your local speaker during the projection and restore it when it closes the application. -
Page 21: Make Wps Token
8.10.16 Make WPS Token 1) Click “Make USB PnS Token” to make a USB WPS Token, you can insert a USB and follows the wizard to make the Token. After completion, you can plug the USB to any PC to do the projection without installing the WPS software onto every PC. -
Page 22: About
8.10.19 About 1) Click on “About” to show system information. It includes product model name, Application version, IP address and other information. 8.10.20 Exit 1) Click on “Exit” to exit this application. It will stop current playing status and shut down the application immediately. -
Page 23: Dowifi For Mac
DoWiFi for Mac Install the application 1) Make sure your PC WiFi is enabled and connect your PC to WPS box through WiFi. 2) Launch your browser and enter the IP address on browser. You can find the IP address and Host Name (SSID) on the projector/display screen. -
Page 24: Quick Connect
It will start to search WPS receiver automatically. Quick Connect 1) WPS will memorize the last successful connection profile and open the quick connect dialog, you can enter the code (you can find the information on the standby screen) and press the “Connect” button to connect this WPS directly. - Page 25 2) You can press the “Refresh” button to search again or press the “All” button to list all available WiFi Network name. 3) If you don’t like to change the WiFi Network and want to keep the connection to current network, you can press the “Skip”...
-
Page 26: Connect To Receiver Device
Connect to Receiver Device WPS application will search and list the WPS receiver Device. You can select the target receiver device and press the “Connect” button to connect the selected receiver device. 2) You can press the “Refresh” button to search again. 3) If you can’t find the target receiver device from the list, you can press the “Manual”... -
Page 27: Main User Interface
1) If you want to connect to another receiver or cancel the login, please press the “Cancel” button. Main User Interface Login Code Menu Status Indicator Minimize the window Close the window Control Area for Screen Projection Feature Screen Projection 1) Click the “Play”... -
Page 28: Login Code
Stop projecting Pause projecting Enable the Magnifier function Note: button, the new user’s screen When projecting in full screen projection, if another user is clicking on the play will replace the previous user’s screen for projection. When projecting in Quad view mode, if another user is clicking on the selected screen button(#1, #2 , #3, #4 ), the new user’s screen will replace the previous user’s screen for projection. -
Page 29: Show Receiver Information
1) Introduction: MirrorOp Receiver is an application to allow the user to connect Pad/Smartphone (Android and iOS), PC, and display/projector via WPS Pro device. User can then control the projecting PC via Pad/Smartphone. Please refer to the below image for more information. - Page 30 Click on “Launch SidePad” from the menu. In seconds, you shall see the PC desktop shown on the iOS/Andriod Device. Now you can control the projecting PC from your iOS/Android device. 3) If there is no Smartphone/Pad device detected after clicking on “Launch SidePad” the below image will show up.
-
Page 31: Launch Webslides
9.10.5 Launch WebSlides Introduction: Webslides is an application to allow the user/presenter to broadcast the projecting screen/slides to allow multiple login users to receive the slides during a presentation and save the slides for note taking later. Note: Webslides is not available when Quad view is in use. 1) Presenter: Make sure your PC/Mac is connected to WPS box and click on “Launch Webslides”, when the function is on, the item will be checked on the main menu. -
Page 32: Select Projection Desktop
Note: The WPS logged-in user is not identical to WebSlides user, and they both consume the wireless bandwidth for device connection. If there are more than 10 users logged into WPS, it is recommended to connect WPS to company network through Ethernet or bridge WPS to a router due to wireless bandwidth concern. User should connect WPS via company network or router in order to secure the projection performance. -
Page 33: Projection Aspect Ratio
9.10.10 Projection Aspect Ratio 1) Click on the “Projection Aspect Ratio”, choose “Keep aspect ratio” to keep the original aspect ratio if the desktop resolution is different from WPS output resolution, or choose “Fit full screen” to project the screen to full screen. -
Page 34: Web Management
Web Management 10.1 Home Page 1) Make sure your PC connect to WPS Pro box successfully. 2) Enter the receiver IP address on your browser; you can find the IP address on the projector/display screen. (Default IP is 192.168.100.10). 3) Your browser will lead you to the below page. -
Page 35: Conference Control
10.3 Conference Control 1) Select “Conference Control” function, you can find the current connected user list on this page. 2) Enter password and then press [Login]. (default password: moderator) 3) After login, you can see a User List on the screen which indicates all of users connected to WPS box. 4) The default setting is “allow control from this page only”. -
Page 36: Admin
5) There are three columns, “User Name”, “Play Control” and “IP Address”. a. Play Control: There are six buttons, including Play(Full) , Screen #1 , Screen#2 ,Screen #3 , Screen#4 and Stop b. Moderator can click on the “play” button to allow the projecting. c. -
Page 37: System Status
10.4.1 System Status 1) Click on “System Status” option, it will show current system status. Model Name: Product model name Versions: Firmware version no.: Product firmware version number. Network Status: IP address：IP address of WPS device. Subnet Mask：subnet mask ... -
Page 38: Network Setup
10.4.3 Network Setup 1) Click on “Network Setup” option, it will show the network setting items, < IP Setup> You can select “obtain IP address automatically” or “Use the following IP address” to enter the IP address. The default setting is as following: ... - Page 39 < AP Client> Connect to Existing AP: The default setting is “Disable”. If you choose “Enable” you need to enter the existing AP SSID that you want to connect. When you select “Enable” option, the following information needs to be entered accordingly to the existing AP setting: Encryption: Select “Disable”...
-
Page 40: Osd Setup
10.4.4 OSD Setup 1) Click on “OSD Setup” option, you can: Change Standby Image Change Standby Image: Replace the whole standby image <Reset to default>: Restore to default Logo image. <Image File Upload>: Enter or browse the file name and upload the customized Logo Image. Please refer to remark on screen when select the file. -
Page 41: Change Passwords
Device Information: Show all or Hide all the device information on standby screen. (Note:When Device Information set Hide option, the ”Overlay Device Information” & “Screen Saver Setting” will be disabled) Overlay Device Information: Enable or disable the device information will be show on top of projection screen when doing projection. -
Page 42: Reset To Default
10.4.6 Reset to Default 1) Click on “Reset to Default” option to restore factory default settings. <Apply>: Confirm and take action. *** You can also restore factory default setting from WPS box reset button. You can find the reset button underneath the box. -
Page 43: Webslides Setup
4) Firmware Upgrade A. Firstly, you have to get latest firmware image file from your vendor. B. Click <Browse> to specify file name you want to upgrade. C. Click <Upgrade> to start. D. A warning message shown and countdown counter on the screen. E. -
Page 44: Reboot System
10.4.9 Reboot System 1) Click on “Reboot System” option, you can restart the system Click on <Reboot >button: reboot system automatically. 10.4.10 Logout 1) Click on “logout” on the up right corner, you can logout the administration webpage and return back to the web management front page. -
Page 45: Webslides
10.5 WebSlides 1) Press the “WebSlides” button to enter the WebSlides page. 2) Please refer to 8.10.5 Launch Webslides for more information. -
Page 46: Appendices
Trademarks Optoma and its logo is a registered trademark of Optoma Corporation. Optoma Europe Ltd is the licensee of the registered trademark. Android is a registered trademark of Google Inc. Windows is a registered trademark of Microsoft Corporation in the United States and/or other countries. OS X is registered trademarks of Apple Inc. iOS is a trademark or registered trademark of Cisco in the U.S. -
Page 47: Optoma Global Offices
11.1 Optoma Global Offices For service or support please contact your local office 3178 Laurelview Ct., Tel : 888-289-6786 Fremont, CA 94538, USA Fax : 510-897-8601 www.optomausa.com Service : services@optoma.com Canada 3178 Laurelview Ct., Tel : 888-289-6786 Fremont, CA 94538, USA Fax : 510-897-8601 www.optoma.ca... - Page 48 www.optoma.com...
Need help?
Do you have a question about the WPS Pro and is the answer not in the manual?
Questions and answers