4. Insert a screwdriver into the
opening as far as it will go.
5. Shift selector lever to N.
6. Remove the screwdriver from the
slot.
7. Reinstall the cap.
8. Have the cause of the power
supply interruption remedied by a
workshop.
Manual transmission
To engage reverse, with the vehicle
stationary, depress clutch pedal,
press the release button on the
selector lever and engage the gear.
If the gear does not engage, set the
lever to neutral, release the clutch
pedal and depress again; then repeat
gear selection.
Do not slip the clutch unnecessarily.
When operating, depress the clutch
pedal completely. Do not use the
pedal as a foot rest.
Driving and operating
Caution
It is not advisable to drive with the
hand resting on the selector lever.
131