Volkswagen Beetle 1977 Owner's Manual page 45

Step 2
With the wheels still firmly resting on the
ground, remove the hub cap of the defec-
tive wheel.
Insert the puller in the holes at the rim.
of the hub cap. Put the breaker bar
through the puller, brace one end of the
bar on the wheel rim and tug lightly on
the other end.
When you place the hub cap face down,
you can use it as a tray for your wheel
bolts.
Step 3
Loosen all wheel bolts counterclock-
wise about one turn with the socket
wrench, insert the breaker bar to make
full use of its leverage. Do not yet remove
the bolts.
Step 4
Securely Insert the jack Into the jack
port. There is one on each side under the
running board toward the rear and is
used for front and rear wheel changing.
Never jack the car up by the bumper or
running board.
Provide for a firm base for the jack on
the ground. If necessary, use a board.
Passengers should not remain in the car
when the car is jacked up.
to lower