Subscribe to Our Youtube Channel
Related Manuals for Netatmo Thermostat
Summary of Contents for Netatmo Thermostat
- Page 1 Replacing a wireless thermostat You can watch this installation at: http://netatmo.com/video2 or installing your first thermostat You can watch this installation at: http://netatmo.com/video3...
- Page 2 In the box Warning Warning! 230V • Read these instructions carefully before starting the installation. • The Netatmo Thermostat must be installed according to applicable standards. Thermostat Mobile stand Relay Boiler adapter • Before any intervention, make sure power is turned off.
- Page 3 Note : Some thermostats are connected to different terminals from those on the diagram’s list (for example, eBus, EMS…). In this case, you will have to identify the right thermostat terminals to connect the Relay of the Netatmo Thermostat.
- Page 4 Setting the Relay Testing the Relay The boiler adapter should be placed Connect the Relay into the boiler as far as possible from metallic items adapter. 30 cm (wiring, pipes, electrical grid…). Switch the power supply back on. The boiler adapter can be affixed to the wall with the double-sided tape or the screws provided.
- Page 5 Please note that some boilers can take up to 20 symbol disappears. minutes to respond after pushing the Relay’s button. In doubt, please read in your boiler’s instructions manual [ the «room thermostat» section].
- Page 6 Take off the outer frame of the adhesive. living room. 1,5 m Stick it on the back of your Thermostat. More than 1 m from the A 1,5 m high Away from any cold openings...
- Page 7 If the boiler does the opposite of what is described (for example, it switches OFF when the Thermostat displays MAX), it means that you will have to change the polarity of the Thermostat. You can modify the polarity in the advanced settings of the app once you will have finished the setup.
-
Page 8: Specifications
Specifications SIZE WIRELESS SPECIFICATIONS Thermostat: 83 x 83 x 22 mm Wi-Fi 802.11 b/g/n compatible (2.4GHz). Supported security: Open/WEP/WPA/ DESIGN WPA2-personal (TKIP and AES). Designed by Starck. Wireless connection between thermostat and relay: Translucent minimalist plexiglass cube. radio long range up to 100 m. -
Page 9: Safety Warnings
2. 低功率射頻電機之使用不得影 飛航安全及干擾合法通信；經發 compliance could void the user’s authority reless performance. 現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。 前項合法通信，指依電信法規定作業之無線電通信。 低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性 電機設備之干擾。 Complies with IDA Standards Copyright Netatmo © 2015 All rights reserved. Reproduction and distribution prohibited without written authorization from Netatmo. V5-EN...
Need help?
Do you have a question about the Thermostat and is the answer not in the manual?
Questions and answers