Using Templates; Saving Label Files; Text Label; Pattern Label - Brother P-touch D210 User Manual

Printing Labels (continued)
 Set Margins ( )
/ [Margin]
/ [Full/Half/Narrow/Chain Print]
[Full]/[Half]/[Narrow]
Sets equal margins on both sides of the text.
Full Half Narrow
ABC ABC
25mm 25mm
12mm 12mm 4mm
[Chain Print]
Allows to print several labels with minimum margins.
Enter text.
1.
Press , then [Copies: ] appears.
2.
Press / , or enter a number using
3.
the number keys, to select the number of
copies.
Press . Printing will start, and then the
4.
message "Feed OK?" appears.
Press to enter more text.
5.
Clear the text, enter the text for the next label,
6.
and then press .
When the message "Feed OK?" appears after
7.
the last label is printed, press .
After the tape is fed, press the cutter lever to
8.
cut off the chain of labels.
NOTE
• When [Chain Print] is set, feed the tape before using
the cutter; otherwise a part of the text may be cut off.
• When [Half] or [Narrow] is set, the displayed
label length is the length from the printed dots
( ) to the end of the label. Cut along the printed
dots (:) with scissors.
LCD Label image
Full
ABC
67mm
Half
Narrow
ABC
25mm
• To print more than one copy of a label with a
minimum margin, set the margin to [Narrow].
• Do not pull the tape since this may damage the
tape cassette.
• After pressing , "Accepted" appears for
about one second.

Saving Label Files

You can save up to 30 labels and recall them for
printing at a later date. A maximum of 80 characters
can be saved per file and a maximum of 2400
characters can be saved in the device's memory.
You can also edit and overwrite the stored labels.
 Save
Enter Text
/ [Save]
/
ABC
4mm
 Print
/ [File]
/ [Print]
[Copies: ]
-
 Open
/ [File]
/ [Open]
NOTE
• If you try to store a label when there is already a
label stored with that number, a message
"Overwrite OK?" appears. Press
your new label. Press
• You must type text before using the save function.
• After pressing , "Accepted" appears for
about one second.
ABC
41mm
3

USING TEMPLATES

Text Label

This function allows you to create various labels
using the built-in templates. Refer to the Text Label
templates table included in this insertion sheet.
Example 1:
[A template that includes one
/ [File] repeated graphic]
[Select Category]
[Select Design]
/ text, and then enter text
/ /
[Print]
• To use two different fonts on one label, select
one of the three additional Text Label templates
(Examples 2-4).
/ Example 2:
[A template that includes two fonts]
[Select Category]
[Select Design]
to save
to cancel.
the text and then enter text
[Input Text 2] Clear the text and then
enter text
Example 3:
[Template that includes two fonts
and a frame]
• Please see the procedure in Example 2.
Example 4:
[Template that includes two fonts on
two lines]
• Please see the procedure in Example 2.

Pattern Label

This function allows you to create unique labels by
using built-in templates. Refer to the Pattern Label
templates table included in this insertion sheet.
You cannot enter text when using Pattern Label
templates.
Example:
[Select Category]
/ [Text] [Patterns]
/
[Input Text 1] Clear the
/
[Copies: ]
NOTE
For Text Label Templates
• You cannot use Set Label Length when printing
Text Label templates.
• To clear the text, move the cursor to the right
side of the text you want to clear, and then press
.
• To clear all text, press
/ [Text]
Clear" appears, press
/
to cancel.
[Input Text 1] Clear • To preview labels, press the Preview key when
[Print] appears on the LCD.
• The copy print function is disabled when using
Text Label templates.
For Pattern Label Templates
[Print]
• Press the Space key to return to the factory
setting for the "Label Length" mode. The factory
setting is [100 mm].
• You cannot use the preview feature when using
Pattern Label templates.
For Text Label and Pattern Label Templates
• These templates are only available when using
12 mm wide tape cassettes.
• The templates cannot be edited.
• To exit templates and return to the text input
screen, do one of the following:
a) Press
b) Press
press
• You cannot save labels created using templates
to memory.
• When you access Text Label or Pattern Label
templates, your most recently printed Text
Label or Pattern Label template label length will
be recalled.
• "Please Cut" appears on the LCD for
two seconds after pressing
/
[Select Design] /
[Set Label Length]
[30-999 mm] [Print]
/ / -
and . When "All
to clear. Press
.
/ to select [Quit], and then
when "Print" appears.
.