Tail Lights - Opel 2015 Combo Owner's Manual

Tail lights

1. Remove the three retaining
screws.
2. Remove light housing from
vehicle.
3. Disengage connector plug from
bulb holder.
4. Unscrew the four retaining screws
using a screwdriver. Turn bulb
holder for reverse light
anticlockwise and replace bulb.
5. Remove bulb holder and seal
from light housing.
6. Push bulb into socket slightly,
rotate anticlockwise, remove and
renew bulb.
Vehicle care
Brake light (1)
Turn signal light (2)
Tail light (3)
Tail light/fog light (4)
7. Install seal on bulb holder
ensuring it is fitted correctly.
Install bulb holder in light housing
ensuring that it engages correctly.
Tighten the four retaining screws
using a screwdriver.
8. Install reverse light bulb holder
and turn clockwise to tighten.
9. Engage connector plug.
137