Canon PowerShot SX420 IS User Manual page 91

Registering CANON iMAGE GATEWAY
To link the camera and CANON iMAGE GATEWAY, add CANON iMAGE
GATEWAY as a destination Web service on the camera. By setting
this, an e-mail notification for Camera Web Link Settings will be sent,
so you must use the e-mail address that you use on your computer or
smartphone.
1
Access the Wi-Fi menu.
● Press the [
● After the [Device Nickname] screen is
displayed, press the [ ][ ] buttons to
choose [OK], and then press the [ ]
button.
2
Choose [
● Press the [ ][ ][ ][ ] buttons to choose
[ ], and then press the [ ] button.
3
Consent to entering your e-mail
address.
● Read the displayed content, press the
[ ][ ] buttons to choose [I Agree], and
then press the [
] button.
].
] button.
4
Establish a connection with an
access point.
● Connect to the access point as described
in steps 5 – 7 in "Using WPS-Compatible
Access Points" ( = 87) or in steps 2 – 4
in "Connecting to Listed Access Points"
( = 89).
5
Enter your e-mail address.
● Once the camera is connected to CANON
iMAGE GATEWAY via the access point, a
screen is displayed for entering an e-mail
address.
● Enter your e-mail address, press the
[ ][ ] buttons to choose [Next], and
then press the [ ] button.
6
Enter a four-digit number.
● Enter any four-digit number, press the
[ ][ ] buttons to choose [Next], and
then press the [ ] button.
● You will need this four-digit number later
when setting up linkage with CANON
iMAGE GATEWAY in step 8.
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
4
P Mode
5
Playback Mode
6
Wi-Fi Functions
7
Setting Menu
8
Accessories
9
Appendix
Index
91