Wear The Tracker Pod; Clean The Band - iFIT LINK IFLINK115.0 User Manual

Wear The Tracker Pod

How to Fasten the Band
Wrap the band around your wrist and press the pegs on the clasp firmly into the desired adjustment holes . Make sure that
the band is slightly loose on your wrist . Reverse these actions to unfasten the band .
Note: As with any watch or jewelry, a very small percentage of users may experience skin irritation while wearing the band.
If you experience any skin irritation, discontinue wearing the band and carry the tracker pod independently in your pocket. If
you have questions, send email to support@iFit.com.
Independently
To carry the tracker pod independently, simply place it in your pocket . Make sure that the tracker pod
will not fall out of your pocket as you move.

Clean The Band

If you wear the tracker pod in the band, regularly remove the band and clean it with water and a few drops of mild liquid soap .
Do not place the band or the tracker pod in a dishwasher, washing machine, or dryer. Allow the band to dry thoroughly
before you put it back on your wrist .
6
In The Band
How to Insert the Tracker Pod Into the Band
Orient the tracker pod and the band as shown . Make sure that the
display on the tracker pod is aligned with the display window on the
band. Flex the band and press the tracker pod into the opening in the
inner side of the band . Reverse these actions to remove the tracker pod
from the band .
Note: More than one band may be included with this model; select the
band that best fits your wrist.