Curtis BT1056 User Manual

Bluetooth mono headset

Table of Contents

Download this manual

Bluetooth Mono Headset

User's Manual

Model No.: BT1056

1. Introduction

Thank you for purchasing the BT1056. Together with Bluetooth mobile phones and other Bluetooth

embedded devices, the BT1056 allows you freedom to make and receive calls while on the move or in the

office, you can connect the headset to a compatible phone that supports Bluetooth wireless technology.

Please read the user manual to make the best use of this BT1056 and its many features.

■Overview

The headset contains the following parts as shown in the figure:

①Answer/ end key.

②Led Indicator (red/blue)

Table of Contents

Do you have a question about the BT1056 and is the answer not in the manual?

Page 1 Thank you for purchasing the BT1056. Together with Bluetooth mobile phones and other Bluetooth embedded devices, the BT1056 allows you freedom to make and receive calls while on the move or in the office, you can connect the headset to a compatible phone that supports Bluetooth wireless technology.
Page 2 ③Volume up and volume down buttons ④Microphone ⑤Earphone ⑥Charger socket Before you can start using the headset, you must charge the battery and pair the headset with a compatible phone. Note: Parts of the headset are magnetic, Metallic materials may be attracted to the headset .Do not place credit cards or other magnetic storage media near the headset, because information stored on them may be erased.
Page 3: Basic Use
■Disconnect the headset from the phone To disconnect the headset from your phone (for example, to connect the phone to another Bluetooth device), do one of the following: ·Switch off the headset. ·Disconnect the headset in the Bluetooth menu of your phone. ·Move the headset more than 10 meters (30 feet) away from the phone.
Page 4 During a conversation, press and hold the Answer/end button for 3 Seconds, the BT1056 will be switched off and the call will be transferred to your mobile phone. If you want to transfer the call back to your BT1056, press and hold the Answer/end for 3 seconds till you hear a beep. Release the button and the call is transferred back to your BT1056.