Page 1
OneRemote DVB-T2 IV Digital TV tuner for terrestrial broadcasts For Bang & Olufsen TVs with SCART connection only User Guide 30012727u1uk OneRemote - www.oneremote.dk...
4. Previous Channel Exit *1 As the coloured function keys have been assigned to other functions, they have to be preceded with O to retrieve their original coloured functions. Green function Red function Yellow function Blue function OneRemote - www.oneremote.dk...
Special or Alternative Functions ......................4 Control with BeoLink 1000 ........................4 Introduction ................................5 Installation - Quick Start ............................5 OneRemote’s INT Converter System .........................5 Option Programming ............................6 Menu Key Option ........................... 6 The Stand by Option ..........................6 Initial Installation ..............................7 Basic Control ...............................7...
Control is easiest with a Beo4, Beo5 or a Beo6 remote control terminal, all having coloured function keys. But the tuner may also be controlled with a BeoLink Back 1000 with certain limitations. Exit Search The key sequences for BeoLink 1000 control are: Green Yellow Blue OneRemote - www.oneremote.dk...
Read more about HDMI or DVI connections in the TV’s user guide. If the OneRemote DVB-T2 tuner is connected to a TV that is part of a Bang & Olufsen linksystem in a main room with one or more linkrooms connected, complete control is possible from all linkrooms. Linkroom programming is described in the TV’s user guide.
Option Programming OneRemote INT converters are pre-programmed with various options offering different levels of functionality. Options are typically selected by the initial installation and not changed by daily use. One or more options might be selected, and the converter remembers these options even after a power loss.
Initial Installation When installed initially or re-installed after re-setting the OneRemote DVB-T2 tuner’s installation guide is shown on the TV screen. 1. Select OSD Language and use maneuver arrows to pick the language. 2. Select Country and use maneuver arrows to pick the country.
4. Press to unlock the channel again. 5. A password has to be entered to open a locked channel. Enter the standard password ‘000000’ or your own password created in the menu under ‘system’. OneRemote - www.oneremote.dk...
PAL, which is the preferred format across most of Europe, is set as default. NTSC is primarily used in America. Video Output This selection is only relevant for a SCART connection. RGB provides the most detailed picture. OneRemote - www.oneremote.dk...
Select automatic or manual (related to GMT).Vælg automatisk eller manuelt (mht. GMT tidszone). Region Is pre-programmed to Copenhagen, Denmark. Timezone Select timezone, if [Timeshift] is set fo Manual. Automatic Standby Select automatic standby to adjust the period for automatic stand by. The default setting is 3 hours. OneRemote - www.oneremote.dk...
S for selection. Confirm that the Select ”Factory Settings” in the main menu and press change is desired by entering the valid password. Press to confirm. This procedure deletes all customer settings and channels. Information See tuner hardware details and software version. OneRemote - www.oneremote.dk...
USB media of the selected program. Playback to see a list of the recordings. Select the desired recording and press OO. The Press recording is shown in a little window.Press for full screen viewing. OneRemote - www.oneremote.dk...
. To resume playback of the time shifted broadcast press O0. The time shifted program may be run fast forward or rewound by pressing The time shift procedure can be stopped by pressing qresulting in the return to the actual broadcast in real time. OneRemote - www.oneremote.dk...