Car-Systems Parktronic system Skoda Octavia II Assembly Manual page 2

1
Start with dismantling the front bumper.
In order to do this take out lamps by levering up
the holders in marked places in order to remove
the screws located underneath.
3
After dismantling the front bumper find marking
on the bumper, drill holes and stick sensor
holders. Connect the beam as shown on the
photo.
2
Skoda Octavia
www.carsystems.eu
- Parktronic system assembly manual
2
Remove the screws located at wheel arches
on the right and left side.
4
Dismantle the rear bumper. In order to do so
remove screws located underneath.
and drill holes next to wheel arches as in the
front bumper and stick sensor holders.
Lead the beam as shown on the photo.