Toyota 2001 MR2 Spyder Owner's Manual page 213

SB73044
2. Release the bulb retaining spring
and remove the bulb. Install a new
bulb and the bulb retaining spring.
To install a bulb, align the tabs of the
bulb with the cutouts of the mounting
hole.
01MY MR2(U) L/O 0008
SB73006
3. Install the rubber cover as shown
and snuggle on the boss. Insert the
connector.
Make sure the rubber cover fits snugly on
the connector and the headlight body.
Aiming is not necessary after replacing
the bulb. When aiming adjustment is nec-
essary, contact your Toyota dealer.
2001 MR2 (OM17482U)
—Parking lights
SB73046
SB73047
191