LG 40LF6300 Owner's Manual page 11

_NOTE
Use t he screws that are listed onthe VESA
standard screw specifications.
The w all mount kitincludes an installation manual
and necessary parts.
The w all mount bracket isoptional. You c an obtain
additional accessories from your local dealer.
The l ength ofscrews may differ depending upon
the wall mount. Make sure touse the proper
length.
For m ore information, refer tothe manual
supplied with the wall mount.
When using the wall mounting bracket, apply
the adhesive protective label tocover the
unused stand opening(s).This will p revent the
accumulation ofdust and dirt. (Use only w hen
provided with your particular model.)
Provided Item
Adhesive Protective Label
When attaching awall mounting bracket tothe
TV, insert the wall mount inner spacers into the
TV wall mount holes toadjust the vertical angle
oftheTV. (Use only w hen p rovided with your
particular model.)
Provided Item
WallMount Spacer
Connections (Notifications)
You can connect various external devices to theTV.
Supported external devices are: HD receivers, DVD
players, VCRs, audio systems, USB storage devices,
PC, gaming devices, and other external devices. For
more information on external device's connection,
refer to the manual provided with each device.
_NOTE
• If you record a TV program on a DVD recorder or
VCR, make sure to connect theTV signal input
cable to the TV through a DVD recorder or VCR.
For more information of recording, refer to the
manual provided with the connected device.
The external device connections may differ from
the model.
Connect external devices to theTV regardless of
the order oftheTV port.
If you connect a gaming device to the TV, use the
cable supplied with the gaming device.
Refer to the external equipment's manual for
operating instructions.
In PC mode, there may be noise associated
with the resolution, vertical pattern, contrast
or brightness. If noise is present, change the PC
output to another resolution, change the refresh
rate to another rate or adjust the brightness and
contrast on the PICTURE menu until the picture is
clear.
Depending upon the graphics card, some
resolution settings may not allow the image to be
positioned on the screen properly.
Connecting to an Antenna or Cable
Connect an antenna, cable, or cable box to watch
TV.The RF cable may not be supplied, depending
upon the model.
z_xCAUTION
• Make sure not to bend the copper wire of the RF
cable.
Copper w ire
Complete all connections between devices, and
then connect the power cord to the power outlet
to prevent damage to your TV.
O NOTE
Use a signal splitter to use 2TVs or more.
DTV Audio Supported Codec: MPEG, Dolby
Digital.
/
11