Positioning Your All-In-One Pc; Connect The Power; Connect The Audio Components - Hibertek M22 User Manual

Positioning your All-in-one PC

Place your All-in-one PC on a flat surface such as a table or desk, keep it
stable. Then, tilt the display panel to an angle best for your field of vision. The
maximum angle of inclination is 30 degrees from an upright position.

Connect the Power

Connect the power cord to the power port of AIO. Plug the power cord into
an electrical outlet.
Do not connect the AC power cord to an AC outlet prior to connecting the DC Plug to
the system.

Connect the Audio Components

Connecting the Microphone /Headphone/Speakers
1. Plug the microphone cable into the Microphone port (Pink) of your AIO.
2. Insert the speaker cable into the green Line-out jack. Plug the
earphone cable into it instead of speaker cable if you listen by
earphone.
30°
-15°