Advertisement
Quick Links
Advertisement
Summary of Contents for Lochside VOYAGEUR
- Page 1 ASSEMBLY INSTRUCTIONS...
-
Page 2: Tools Required
Congratulations on your purchase of your brand new Lochside bicycle! Please read carefully for step-by-step instructions on how to properly assemble your new ride. UNPACKING & SETUP TOOLS REQUIRED Keep the box upright and lift the bike out carefully. Wrench 15mm... - Page 3 STEM & HANDLEBARS Insert the handlebars and quill stem and into the head tube. Ensure the brake and shifter cables are untangled and in front of the head tube. Align the handlebars and quill stem to the fork. Adjust the stem to required height, and tighten the bolt on top of the stem with the 6mm allen key.
-
Page 4: Saddle & Seatpost
SADDLE & SEATPOST Remove the saddle and seat post from the small brown box. Loosen off the seatpost bolt most of the way and rotate the seat clamp 90 degrees, this will make it easier to attach to the saddle. Attach to seatpost to the seat rail of the saddle. -
Page 5: Front Fender
FRONT FENDER Remove the front brake center bolt Slide the upper front fender mount onto the brake center bolt. Next, slide the center bolt back through the brake mounting bolt Lightly tighten nut down using the 5mm allen key Unthread the front fork eyelets blots located at the bottom of the front fork. -
Page 6: Safety Check
HAPPY RIDING! We would love to keep up with our Lochside riders, tag @lochsidecycles or #lochsidecycles so we can see your bike in action. If you have any assembly questions please email us at info@lochsidecy- cles.com or swing by your local bike shop. -
Page 7: Get Social
CONTACT US Lochside Cycles, Inc. 69 - 770 Vanalman Avanue Victoria, BC, Canada V8Z 3B7 Telephone: (250) 830-3825 info@lochsidecycles.com www.lochsidecycles.com GET SOCIAL facebook.com/lochsidecycles instagram.com/lochsidecycles twitter.com/lochsidecycles...