Table of Contents

Advertisement

86
Instruments and controls
If outside temperature drops to 3 °C,
a warning message is displayed in the
Driver Information Centre with
Uplevel-Display or
Uplevel-Combi-Display.
9 Warning
The road surface may already be
icy even though the display
indicates a few degrees above
0 °C.

Clock

Date and time are shown in the
Info-Display.
Time and date settings
CD 300/CD 400/CD 400plus
Press CONFIG. The menu Settings is
displayed.
Select Time & Date.
Selectable setting options:
● Set time: Changes the time
shown on the display.
● Set date: Changes the date
shown on the display.
● Set time format: Changes
indication of hours between 12
hours and 24 hours.
● Set date format: Changes
indication of date between MM/
DD/YYYY and DD.MM.YYYY.
● Display digital clock: Switches
on/off indication of time on the
display.
● RDS clock synchronization: The
RDS signal of most VHF
transmitters automatically sets
the time. RDS time
synchronisation can take a few
minutes. Some transmitters do
not send a correct time signal. In
such cases, it is recommended to
switch off automatic time
synchronisation.
Vehicle personalisation 3 112.
Time and date settings
CD 600/Navi 650/Navi 950
Press Config and then select the
Time and Date menu item to display
the respective submenu.

Advertisement

Table of Contents
loading

Table of Contents