Power-On Self-Test (Post) - Compaq ProLiant 4500 Servers Maintenance And Service Manual

3-2
Diagnostic Tools
Select the "Create Diskettes from CD" menu item.
n
Select the diskette you would like to create from the list and follow the instructions on the
n
screen to create the diskette.
3. Boot the SmartStart CD.
Select the "Manual Configuration and Server Utilities" button.
n
Select the utility wanted from the menu.
n
The System Configuration Utility is available under the "System Configuration" menu
n
item.
The Drive Array Diagnostics Utility is available under the "Diagnostics and Utilities"
n
menu.
The ROMPaq Firmware Upgrade Utilities can be run only from the System Partition or
n
from the ROMPaq diskette. See steps 1 and 2.

POWER-ON SELF-TEST (POST)

POST is a series of diagnostic tests that run automatically on Compaq computers when the system
is turned on. POST checks the following assemblies to ensure that the computer system is
functioning properly:
Keyboard
n
Power supply
n
System board
n
Memory
n
Memory expansion boards
n
Controllers
n
Diskette drives
n
Hard drives
n
If POST finds an error in the system, an error condition is indicated by an audible and/or visual
message. If an error code is displayed on the screen during POST or after resetting the system,
follow the instructions in Table 3-1. The error messages and codes listed in Table 3-1 include all
codes generated by Compaq products. Your system will generate only those codes that are
applicable to your configuration and options.
Maintenance and Service Guide