Using An External Component Via Ads Adapter-Oem Features - Kenwood DDX6902S Instruction Manual

OTHER EXTERNAL COMPONENTS OTHER EXTERNAL COMPONENTS
Adjusting the parking guidelines
Adjust the parking guidelines according to the size
of the car, parking space and so on.
• Install the rear view camera in the appropriate
position according to the instructions supplied
with the rear view camera.
• When adjusting the parking guidelines, make sure
to use the parking brake to prevent the car from
moving.
1
Display the <Display> setting screen.
On the <TOP MENU> screen:
• Press [K] repeatedly to change the page on
the <Display> menu screen.
2
3
Adjust the parking guidelines by selecting
the mark (1), then adjusting the
position of the selected
Make sure that A and B are horizontally
parallel, and that C and D are the same length.
• Press and hold [Initialize ] for 2 seconds
to set all the marks to the initial default
position.
Using an external component via
ADS adapter—OEM Features
mark (2).
You can control the sources from the component via
ADS adapter.
• Preparation: Configure the settings on the <OEM
Setup> screen beforehand. (Page 60)
1
Connect the ADS adapter to the iDatalink
input terminal. (Page 64)
2
Select "OEM Features" as the source.
(Page 9)
On the <TOP MENU> screen:
• Press [K] to change the page on the <TOP
MENU> screen.
3
Turn on the connected component and
start playing the source.
ENGLISH 41