To Decrease The Set Cruising Speed; To Cancel The Cruise Control - Honda Accord Sedan 1993 Reference Owner's Manual

To decrease the set cruising speed:

Press and hold the SET/decel button. The car will decelerate.
Release the button when the desired speed is reached.
Tap the brake or clutch pedal lightly with your foot. The CRUISE
CONTROL light on the instrument panel will go out. When the car
slows to the desired speed, press the SET/decel button. The car
will then maintain the desired speed.
Even with the cruise control turned on, you can still use the
accelerator pedal to speed up for passing. After completing the pass,
take your foot off the accelerator pedal. The car will return to the
set cruising speed.
Resting you foot on the brake or clutch pedal will cause the cruise
control to cancel.

To Cancel the Cruise Control:

Any of these actions cause the cruise control to cancel.
Tap the brake or clutch pedal.
Press the SET/decel and RESUME/accel buttons at the same time.
Press the Cruise Control Master Switch.
When you tap the brake or clutch pedal, or press the SET and
RESUME buttons at the same time, the CRUISE CONTROL light on
the instrument panel will go out and the car will begin to slow down.
You can use the accelerator pedal in the normal way.
If you use the brake or clutch pedal to cancel cruise control, the
system retains the previously-set cruising speed. To return to that
speed, accelerate to above 25 mph (40 km/h) and press the
RESUME/accel button until the CRUISE CONTROL light comes on.
The car will accelerate to the same cruising speed as before.
If you cancel the CRUISE CONTROL by pressing the SET and
RESUME buttons at the same time, the previously-set cruising
speed is erased. To use the cruise control, accelerate to the desired
cruising speed and press the SET/decel button.
Pressing the Cruise Control Master Switch turns the system
completely off and erases the previous cruising speed from memory.
To use the system again, see page 52.
I n f o r ma t i o n P r o v i d e d b y :