Integra DLB-40.6 Instruction Manual

PACKAGE CONTENTS
* 2 9 4 0 1 8 0 8 *
DLB-40.6
Make sure you have the following items before use.
The number in parenthesis indicates the quantity.
Soundbar System
In catalogs and on packaging, the letter at the end of the product name
Instruction Manual
indicates the color.
Main unit (SBD41) (1) AC adapter (1)/Power cord (1)
Thank you for purchasing an Integra product. Please read this manual thoroughly before
making connections and plugging in your new Integra product.
Following the instructions in this manual will enable you to obtain optimum performance and
Remote controller (RC-887S) (1) Optical digital audio ф3.5 mm stereo mini
listening enjoyment from your new product.
A lithium-ion battery (CR2025) is supplied in cable 5 ft. (1.5 m) (1) plug cable (1)
Please retain this manual for future reference.
the remote control at the time of purchase.
Trademarks and Licensing
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby
Wall mounting template (1) Stand (2)/Cushion (4)/
Laboratories.
Mounting screws (3/8" (10 mm)) (4)
The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use of such
marks by Onkyo is under license. Other trademarks and trade
names are those of their respective owners.
AuraSphere™ is a trademark of Onkyo Corporation.
Wireless subwoofer (SKW41) (1)/
AuraSphere is a listening experience technology developed by Onkyo
Power cord (Polarized plug) (1)/
Corporation and Sonic Emotion ag.
Cushion (4)
E n
2
D1405-0
1. Attach the template to the position to mount.
PREPARATION Be careful not to make a tape mark on the wall.
Stand at a distance and check its position. Check if it is horizontal.
2. Mark the two screw points with a pen.
Placement
Select an appropriate placement for your environment.
Place the supplied wireless subwoofer in an appropriate place for your use
environment.
To enjoy the best sound, do not place an object on both sides of the unit.
Place the supplied wireless subwoofer within the 33 feet (10 m) distance.
Mounting to Wall
Leave 1" (25 mm) between the soundbar and your TV.
3. Remove the template and screw the screws into the wall.
Use the screws with 3/16" (4 mm) diameter.
Refer all servicing to qualified service personnel. Keep 5/16" (8.5 mm) of the screw protruding from the wall surface.
Do not use the supplied mounting screws for stand.
Wall
Accessories to be prepared: Wall mounting template 3/16" (4 mm)
5/16" (8.5 mm)
3 4
4. Connect all cables to the soundbar. Mounting on Low Board or TV Stand
( See 7 to 8 pages)
5. Insert the head of the screw into the keyhole slot of the soundbar and fix it
firmly.
Please confirm that the head of the screw is at the top of the hole.
Do not use the supplied stands.
Keyhole slot
Accessories to be prepared: Stands, Cushion, Mounting screws
Before placing the soundbar on the boards, attach the supplied stands to prevent
falling.
(Front side)
Please note:
(Back side)
When preparing the screws used for wall mounting, ask qualified service personnel
and give careful consideration to their type, material and length so that they can
withstand the weight. If reinforcement is necessary, use reinforcing plates or anchors.
Onkyo is not responsible for accidents or damage caused by improper installation,
insufficient wall strength, improper screw installation or natural calamity, etc.
5 6
Connections
Connect the TV and this unit using one of the connection cables of the following.
We recommend using the supplied optical digital audio cable or a separately 4
sold digital coaxial cable for digital connection.
2
3
1
1
COAXIAL jack IR IN jack
Connect a separately sold cable to Connect a separately sold IR control
input the sound. system to allow the remote control
signal to pass through.
OPTICAL jack When you connect an IR control
Connect the supplied optical system to this unit, remote control
digital audio cable to input audio. sensor of the front panel of the
unit is disabled.
ANALOG jack
Connect the supplied stereo mini USB port
plug cable to input audio. Connect a USB flash drive.
7 8
Wireless Subwoofer
1
Cushion
2
(Bottom) Integra Division of
18 park Way, Upper Saddle River, N.J. 07458, U.S.A.
Listening to TV
Tel: 800-225-1946, 201-818-9200 Fax: 201-785-2650
http://www.integrahometheater.com
Turn on the TV.
For details on operation, see the "BASIC OPERATION" ( P.11).
Integra Division of
The unit can be operated with your existing TV remote controller. For details
on operation, see the "Using TV Remote Controller" ( P.17). Liegnitzerstrasse 6, 82194 Groebenzell, GERMANY
Tel: +49-8142-4401-0 Fax: +49-8142-4208-213
1 1
http://www.integra.eu
Integra Division of
2
1301, 555 Tower, No.555 West NanJin Road, Jin an,
Shanghai,
China 200041, Tel: 86-21-52131366 Fax: 86-21-52130396
3
2 3 http://www.integra.com.cn
Integra Division of
1. Turn the power on.
2. Switch the input to TV. Kitahama Chuo Bldg, 2-2-22 Kitahama, Chuo-ku,
OSAKA 541-0041, JAPAN
(On the buttons of the unit, switches
Tel: 072-831-8023 Fax: 072-831-8163
in the order of TV USB
http://www.integraworldwide.com
Bluetooth.)
3. Adjust the volume.
SN29401808
9 (C) Copyright 2014 Onkyo Corporation Japan. All rights reserved.