Detection; Signals Detected; Audio Alerts; Visual Display - Cobra XRS 9445 Operating Instructions Manual

Settings
Your Detector
Radar Alert Settings
The detector allows you to choose whether it will show alerts on the X, K and
Ku bands. The factory settings are: X Band and K Band On; Ku Band Off.
To Turn X Band On and Off
While no signal is
Tone Voice
being detected, press
X On = Two beeps X On
and hold both the
Dim and Mute
buttons for four
X Off = One beep
X Off
seconds.
To Turn K Band On and Off
While no signal is
Tone Voice
being detected,
K On = Two beeps K On
press and hold both
the Mute and City
buttons for four K Off = One beep
K Off
seconds.
To Turn Ku Band* On and Off
While no signal is
Tone Voice
being detected,
Ku On = Two beeps Ku On
press and hold the
City button for four
seconds.
Ku Off = One beep Ku Off
Pop Alert
The Pop Mode Radar Gun is a single-pulse Doppler radar that is a feature
of a K and Ka (Bee III Ka radar gun) band Instant-On radar gun. It uses
a single, short-time pulse to measure the target vehicle's speed.
The Pop mode receiver senses Pop singles beyond the effective range of
Pop radar guns. As the Pop mode receiver is so sensitive, you should limit
the use of Pop Detect mode to highway and rural driving.
Pop Alert will alert you to Pop radar signals. During the alert, the unit
continues to detect other signals. The factory setting is Pop Detect Off.
14 English
Settings and Detection
Your Detector
Pop Alert
(continued)
To Turn Pop Alert On and Off
While no signal is
being detected,
press and hold both

Visual Display

the Dim and City
X will blink twice
buttons for four
in the display
seconds.
X will blink once
in the display
Visual Display

Detection

K will blink twice
in the display

Signals Detected

K will blink once
The tables on the following pages show you the types of Signals your detector
in the display
will detect, as well as the voice and visual alerts it provides for each of them.

Audio Alerts

Visual Display
In Voice Alert mode you will first hear several tones, then a voice message
X and K will blink
announcing the type of signal detected, followed by more tones. In Tone Alert
twice in the display
mode, you will hear the tones only.
X and K will blink
In both Voice Alert and Tone Alert modes, a distinctly different alert tone is
once in the display
used for each type of signal detected (including separate tones for each laser
signal). For X, K, Ka and Ku band radar signals, the tones will repeat faster as
you approach the signal source. The repeat rate of the tones gives you useful
information about the signal detected. (See responding to alerts on page 18.)
Visual Display
An indication of the type of signal detected will appear in the UltraBright
data Display. During X, K, Ka and Ku alerts, a number will also appear,
indicating the strength of the signal detected. (1 = weakest, 5 = strongest)
X Signal Detected
2
X K Ka V S
Tone Voice Visual Display
Pop On = Two beeps Pop On P will blink twice
in the display
Pop Off = One beep
Pop Off P will blink once
in the display
K Signal Detected Ka Signal Detected Ku Signal Detected
3 5 4
X K Ka V S X K Ka V S X K Ka V S
Nothing Comes Close to a Cobra
•
® 15