1 - Description Ventilation Welding should never be performed in 1.1 - General completely enclosed spaces without ade- GSX 750 rectifier is a power source with quate means to exhaust gases and fumes. constant current characteristics projected for welding with coated electrodes using Electrical protection direct current.
3 - Duty cycle 4 - Technical characteristics Duty cycle is the rate between the period of time a welding equipment can supply TECHNICAL CHARACTERISTICS a given maximum welding current (load ABNT class time) and a reference time which, as per Current range (A) 70 - 750 international rules, is considered to be 10...
1 - On/Off switch = allows operator are mentioned on the nominal plate. GSX to switch on and switch off the 750 is projected to operate in triphasis equipment mains of 220, 380 or 440 V, 60 Hz. 2 - Negative outlet terminal = for For a GSX 750 rectifier electrical feeding, working cable connection the feeding cable supplied together with...
Do not use electrical system “neutral” 750 rectifier does not require special main- for grounding connection. tenance. It is enough to clean it internally, once in a month, using dry and oil free compressed air at low pressure. 6.4 - Welding circuit GSX 750 rectifier good performance de- After this procedure, check electrical pends on use of a Copper working cable,...
Need help?
Do you have a question about the GSX 750 ITAIPU and is the answer not in the manual?
Questions and answers