Advertisement
FRONT PANEL CONTROL
Channel 2:
Volume
This volume knob controls the output level specific to Channel 2. With the Master Volume
switched ÒoutÓ this is solely responsible for the loudness of this channel. With the Master
Volume switched ÒinÓ this pot works tandem with the Master. In that case, the higher settings of
this pot will give more gain and the Master will be used for overall volume.
Bass
The Bass EQ knob has been carefully tailored to cover the critical low-end frequencies in the
electric guitarÕs sonic range. Whether you need depth in your sound or low-end punch, this
control will allow you to dial in just the right amount of bass frequencies.
Treble
The Treble EQ knob allows you to control the amount of high-end frequencies that determine the
cutting character of your sound. For more sparkle and high-end definition turn this knob past
noon. For a warmer and rounder sound, turn this knob below noon in conjunction with turning up
the Bass knob.
Tone
This is a 5-position knob used for instant access to your favorite sounds. Turn it clockwise for
increasingly darker, thicker tones. Turning the knob counterclockwise gives you more treble and
bite. The 5-position switch gives you a distinct advantage in being able to recreate the tone you
want time after time.
Tone Switch
This switch gives you the option of using the 5-position tone knob above or using the bass and
treble knobs that follow. Switch in the left position gives you the 5-position knob. Switch in the
right position gives you the bass and treble knob. The amp uses either the 5-position or the bass
and treble knobs for tone; they are not used in conjunction with one another.
Reverb
The reverb circuit is a completely new Bad Cat design that adds spatial dimension to the tone
produced by the amp. Incorporating the very best 3-spring reverb tank with newly designed
reverb tone circuit, the reverb can go from subtle classic spring reverb effects to rollicking surf
reverb to cavernous hall-like setting with a simple twist of this knob. This reverb circuit was
carefully designed to be useful across the entire sweep of the reverb range. It adds a wide range
of spatial effects that you just canÕt duplicate with pedals and digital effects processors.
4
Advertisement
