Using Caller Id - Motorola V810 Start Here Manual

You must turn on automatic redial to use the feature. To
turn automatic redial on or off:
Find the Feature
When automatic redial is turned off, you can manually
activate the feature to redial a phone number. When you
hear a fast busy signal and see Call Failed:
Press
N or RETRY (+)

Using Caller ID

Calling line identification (caller ID) displays
information about incoming calls in your phone's
032380o
external and internal displays.
• When the caller's name is stored in Contacts with a
caller ID picture, your phone shows the number on the
external display and the picture on the internal display.
(You must open the flip to view the picture.)
For instructions on using a photo as a caller ID
picture, see page 19.
• When the caller's name is stored in Contacts without a
picture, the phone displays the caller's name.
• The phone displays Incoming ... when caller ID
information is not available.
M > Settings > Initial Setup
> Auto Redial
To
activate automatic redial
51