Nisis Quickpix Qp2 Installation Manual

Setting up your NISIS QUICKPIX Qp2 Digital Camera
Welcome
Thank you and congratulations on your purchase of the NISIS Qp2 Digital Camera.
Introduction
The NISIS Qp2 is a 3 in 1 Digital Camera, providing Digital still pictures, video movies and live Web Cam
pictures.
Package Contents
Please check that your NISIS Qp2 Digital Camera package contains the following items. If you find any parts
missing, please contact your supplier immediately.
1. NISIS Qp2 Digital Camera
2. USB Cable
3. Stand Base
4. Stand Camera holder
5. Installation CD and Application CD
6. 2 type AAA 1.5 Volt batteries
7. Carrying strap
8. Installation Guide (this document)
Minimum System Requirements
Pentium 200MHz. Processor or faster
32MB of RAM memory (64MB recommended)
Graphics adapter with at least 2MB RAM and capable of displaying at least 16-bit high colour
1
Installed USB port
Windows 98, ME or 2000 operating system
CD ROM Drive
1
It is recommended that you check to ensure that your USB ports have been installed, before you commence the
installation by following these instructions :-
1. Select Start>Settings>Control Panel>System>Device Manager if you have Windows 98 or ME, or
Start>Settings>Control Panel>System>Hardware>Device Manager if you have Windows 2000.
2. In the list of Devices shown in the Device Manager, there should be a line that reads Universal Serial
Bus controllers.
3. Double click on this line. At least two devices should be listed.
4. One line should end with ".............PCI to USB Universal Host Controller" and the other line
should read "USB Root Hub"
5. If either or both of these two lines have a yellow explanation mark "!" or a red cross next to them,
this indicates your USB controller has a problem. You MUST correct these problems before you
attempt to install the Qp2 camera, otherwise the installation will fail.
2
Windows 95 OSR2 has partial USB support, but because it does not support USB fully, it is possible that USB
devices do not work reliably. NISIS has therefore decided to recommend that non of its USB products are
installed under Windows 95. NISIS does not support any of its USB products under Windows 95.
Checking for the latest Manuals and Software Drivers
NISIS continuously strives to improve its products and services, so manuals and software drivers are updated
frequently. Before you start the installation of this product, we strongly recommend you visit the NISIS web site
at nisis.com to ensure you use the latest manual and the latest software drivers for this product.
You will find the latest drivers and manuals under the Drivers & Manuals section on the web site. All new
manuals have a Revision No. so you can compare the Rev. No. of your manual with the latest Revision on the
web site.
Similarly, Drivers have Version Numbers so you can check to see whether you already have the latest Drivers
Version.
NISIS Qp2 Digital Camera Installation Guide Rev 1.9
2