Basic Operations - Sony TC-KE600S Operating Instructions Manual

z
The Dolby HX PRO* system
automatically works during
recording
z
You can check how much
blank remains on the tape
1 Locate the end of the
recorded portion on the
tape.
2 Press RESET to reset the
tape counter to "0.00."
3 Press ) to fast-forward
the tape to its end.
The tape counter shows the
approximate amount of
remaining time.
* HX Pro headroom extension
originaled by Band & Olufsen
and manufactured under license
from Dolby Laboratories
Licensing Corporation.
"DOLBY, " the double-D symbol
a and "HX PRO" are
trademarks of Dolby
Laboratories Licensing
Corporation.
For details on DOLBY HX PRO,
see "Glossary" on page 14.
6 Start playing the program source.
To
Stop recording
Pause
Take out the cassette
RESET
RESET
0000
MEMORY
0 AMS )
·
0 )
POWER
p P R r
PAUSE REC MUTE REC
tape counter
To adjust the recording balance
Turn BALANCE so that the L (left channel) and R (right channel) peak level
meters in the display are at the levels you want.
To record with the Dolby NR system
Turn DOLBY NR clockwise to the position you want (B, C, or S) before you
start recording.
If you cannot get satisfying results when recording FM
broadcasts with Dolby NR system
Turn DOLBY NR counterclockwise to the position you want (B, C, or S with
MPX FILTER) before you start recording. The filter turns on to make the
Dolby NR system work more effectively. "FILTER" appears in the display.
(For details on the MPX filter, see "Glossary" on page 14.)

Basic Operations

Press
p
P PAUSE. Press the button again to
resume recording.
§ OPEN/CLOSE after stopping
recording
REC LEVEL
BIAS REC LEVEL 5
4 6
3 7
– + – +
CALIBRATION DOLBY NR BALANCE
2 8
OFF
B B
C C
S S 1 9
MPX L R 0 10
FILTER
PHONES
OPEN / CLOSE MONITOR
§
DOLBY NR BALANCE
3-856-296-51(1)
EN
7