Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Instruction Manual
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for SSP MHP161
Summary of Contents for SSP MHP161
- Page 1 INSTRUCTION MANUAL Hammer Drill MHP161 011088 DOUBLE INSULATION IMPORTANT: Read Before Using.
- Page 2 ENGLISH (Original instructions) SPECIFICATIONS Model MHP161 Concrete 16 mm Capacities Wood 30 mm Steel 13 mm No load speed (min 0 - 3,200 Blows per minute 0 - 48,000 Overall length 296 mm Net weight 2.1 kg Safety class • Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
- Page 3 When operating a power tool outdoors, use an must be repaired. extension cord suitable for outdoor use. Use of 20. Disconnect the plug from the power source a cord suitable for outdoor use reduces the risk of and/or the battery pack from the power tool electric shock.
- Page 4 Keep hands away from rotating parts. Installing or removing drill bit Do not leave the tool running. Operate the tool only when hand-held. CAUTION: Do not touch the bit or the workpiece Always be sure that the tool is switched off and •...
- Page 5 Selecting the action mode FUNCTIONAL DESCRIPTION Switch action 1. Action mode changing lever CAUTION: Before plugging in the tool, always check to see • that the switch trigger actuates properly and returns to the "OFF" position when released. 1. Switch trigger 2.
- Page 6 Drilling in wood When drilling in wood, the best results are obtained with wood drills equipped with a guide screw. The guide screw makes drilling easier by pulling the bit into the workpiece. Drilling in metal To prevent the bit from slipping when starting a hole, make an indentation with a center-punch and hammer at the point to be drilled.
- Page 8 Makita Corporation Anjo, Aichi, Japan www.makita.com 884963-880...
Need help?
Do you have a question about the MHP161 and is the answer not in the manual?
Questions and answers