Advertisement
Troubleshooting
The LEDs don't light up.
Please make sure that the device is connected to a power supply. Check that the power cord is properly
plugged into the power jack on your Raumfeld device.
After setup, my Raumfeld devices no longer, or only sporadically, connect to the Wi-Fi.
Make sure that the Raumfeld devices and the smart device with the Raumfeld App are using the same Wi-Fi.
If your router offers guest access, this should not be used for your Raumfeld system. Check that the Dynamic
Host Configuration Protocol (DHCP) on your home router is activated and that all essential devices within the
home network are able to communicate with each other.
The Raumfeld devices are connected to the network but playback is interrupted or skips.
It is possible that one or more Raumfeld devices are receiving either too little or, at times, even no Wi-Fi sig-
nal. Try placing the device closer to the Raumfeld Expand, experiment with different placement locations or
create a wired connection between the affected device and router via Ethernet cable. If possible, try strea-
ming lower resolution audio files.
Where can I find additional information and help?
In case of unexpected problems or additional questions, you'll find an extended FAQ section in the Raumfeld
Online Manual at manual.raumfeld.com.
Raumfeld® is a registered trademark of Lautsprecher Teufel GmbH, used under licence.
All rights reserved. Images may vary slightly from the actual products.
No part of this work may be reproduced, modified or otherwise used without prior
written permission.
U.S. Pat. No. US 8,902,934 ©2015 Berlin Acoustics, Inc.
In the United States, Raumfeld products are sold and distributed by Berlin Acoustics,
Inc., a Delaware corporation, and its authorized agents.
Outside the United States, please contact:
Lautsprecher Teufel GmbH
BIKINI Berlin
Budapester Strasse 44
10787 Berlin – Germany
www.raumfeld.com
Advertisement
