Disc And Remote Control Settings/Factory Settings; (Options); Easy Setup (Resetting The Recorder) - Sony RDR-HX900 Service Manual

QQ
3 7 63 1515 0
Parental Control (DVD VIDEO only)
Playback of some DVD VIDEOs can be limited
according to a predetermined level, such as the age
of the users. Scenes may be blocked or replaced
with different scenes.
1
After step 3 above, select "Parental Control,"
and press ENTER.
• If you have not entered a password, the
display for registering a new password
appears.
Features - Parental Control
Enter a new password.
• When you have already registered a
password, the display for entering the
password appears.
Features - Parental Control
Enter your password.
2
Enter your four-digit password using the
number buttons, then select "OK" and press
ENTER.
Features - Parental Control
Level : Off
Standard : USA
Password
3 Select "Standard," and press , or ENTER.
The selection items for "Standard" are
displayed.
Features - Parental Control
Level : Off
Standard : Others USA
Password
Others
TE
L 13942296513
92
Disc and Remote Control
Settings/Factory Settings

(Options)

The Options Setup allows you to set up other
operational settings.
1
Press SYSTEM MENU while the recorder is
in stop mode.
2
Select "SETUP," and press ENTER.
3
Select "Options," and press ENTER.
The Options Setup appears with the following
options. The default settings are underlined.
SETUP
Settings Format DVD :
Video Dimmer :
Audio Auto Display :
Features Command Mode :
Options Factory Setup
Easy Setup
Format DVD (DVD-RW only)
The recorder automatically starts formatting in
VR mode or Video mode, whichever is selected
below, when a new, unformatted DVD-RW is
inserted.
VR Automatically formats the
disc in VR mode.
Video Automatically formats the
disc in Video mode.
Dimmer
Adjusts the lighting of the front panel display.
www
Normal
Bright lighting.
Power Low lighting. Turns off the
Save lighting when the power is
off.
.
94
http://www.xiaoyu163.com
4
Select a geographic area as the playback
limitation level, and press ENTER.
The area is selected.
• When you select "Others," press the number
buttons to select and enter an area code in
the table (see below). Then select "OK" and
press ENTER.
5
Select "Level," and press ENTER.
The selection items for "Level" are displayed.
Features - Parental Control
Level : Off
Off
Standard : Others
8
Password 7
6
5
OK
4
Cancel
The lower the value, the stricter the limitation.
Discs rated higher than the selected level will
be restricted.
6
Select the level, and press ENTER.
The Parental Control setting is complete.
To cancel the Parental Control setting for the
disc, set "Level" to "Off" in step 6.
To change the password, select "Password" in
OK
step 3, and press ENTER. When the display
Cancel
for registering a password appears, enter a
new four-digit password using the number
buttons, then select "OK" and press ENTER.
Notes
• If you forget your password, you will have to reset it by
selecting "Parental Control" under "Factory Setup" in
Options Setup (page 94).
• When you play discs which do not have the Parental
Control function, playback cannot be limited on this
recorder.
• Depending on the disc, you may be asked to change the
Parental Control level while playing the disc. In this
case, enter your password, then change the level.
Auto Display
On Automatically displays
information on the screen
when the recorder is turned
on, etc.
Off Displays information only
when DISPLAY is pressed.
Command Mode
Changes the Command Mode of the recorder if
other DVD equipment is assigned the same
Command Mode. Be sure to match the Command
Mode switch on the remote to the setting made
here. For details, see "If you have a Sony DVD
player or more than one Sony DVD recorder" on
page 23.
DVD1 Select this if the default
Command Mode conflicts
with other DVD equipment.
VR
Normal
On
DVD2 Select this if the default
DVD3
Command Mode conflicts
with other DVD equipment.
DVD3 The default Command Mode
of the recorder.
Factory Setup
Allows you to select the setup settings by group,
and return them to their default settings. Note that
all of your previous settings will be lost.
1
After step 3 above, select "Factory Setup,"
and press , or ENTER.
The display for selecting a group of settings
appears.
2
Select the group of settings you want to return
to default from "Settings," "Video," "Audio,"
"Features," "Options," "Parental Control,"
and "All," and press , or ENTER.
3
Select "Start," and press ENTER.
The selected settings return to their default
settings.
4
Press ENTER when "Finish" appears.
x ao
y
i
http://www.xiaoyu163.com
8
Area code
Standard
Argentina
Australia
Austria
Belgium
Brazil
Canada
Chile
China
Denmark
Finland
France
Germany
India
Indonesia
Italy
Japan
Korea
Malaysia
Mexico
Netherlands
New Zealand
Norway
Pakistan
Philippines
Portugal
Russia
Singapore
Spain
Sweden
Switzerland
Thailand
United Kingdom
Q Q
3 6 7 1 3
Easy Setup
(Resetting the Recorder)
Select this to run the Easy Setup program.
1
Press SYSTEM MENU while the recorder is
in stop mode.
2
Select "SETUP," and press ENTER.
3
Select "Easy Setup," and press ENTER.
SETUP
Settings Easy Setup
Video
Audio
Features
Options
Easy Setup
4
Press ENTER.
5
Select "Start," and press ENTER.
6
Follow the instructions for Easy Setup
(page 24) from step 5.
u163
.
1-23
2 9 9 4 2 8
One Touch Dubbing
Displays the following options for the One Touch
Code number
Dub function.
2044
Finalize Disc (for all recordable discs except
DVD-RW in VR mode)
2047
Selects whether or not to finalize the disc
2046
automatically following One Touch Dubbing
2057
(page 79).
2070
Auto
Automatically finalizes the
2079
disc following One Touch
Dubbing.
2090
2092
Manual Allows you to finalize the
disc manually.
2115
2165
HQ Setting (HDD only)
2174
Selects the HQ mode used for recording on the
HDD (page 45).
2109
2248
HQ+ Records in higher quality
(approximate 15 Mbps).
2238
2254
HQ Records in the standard HQ
mode.
2276
2304
Auto Title Erase (HDD only)
2363
On
Automatically erases old
2362
titles recorded on the HDD
2376
(page 47).
2390
Off Turns off the function.
2379
Rec Mode Adjust
2427
2424
On Automatically adjusts the
2436
recording mode to enable the
entire program to be
2489
recorded (page 47).
2501
Off
Turns off the function.
2149
2499
2086
2528
2184
1 5 0 5 8 2 9 9 4
m
co
9 9
2 8 9 9
93
95