Casselin Sigma 2200i Owner's Manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

Owner's Manual

Sigma 2200i

Stereo Integrated Amplifier

Table of Contents

Troubleshooting

Need help?

Do you have a question about the Sigma 2200i and is the answer not in the manual?

Questions and answers

Summary of Contents for Casselin Sigma 2200i

Page 1 Owner’s Manual Sigma 2200i Stereo Integrated Amplifier...
Page 2 NOTICE All of us at Classé take extreme care to ensure that your purchase will remain a prized investment. We are proud to inform you that all Classé components have been officially approved for the European Community (CE) mark. This means that your Classé product was subjected to the most rigorous manufacturing and safety tests in the world. The CE mark certifies that your purchase meets or exceeds all European Community requirements for manufacturing consistency and consumer safety.
Page 3 Important Safety Instructions Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Page 4: Table Of Contents
.............7 flexible GUI ....................7 network connectivity, streaming audio and IP control .......7 extraordinary longevity ................7 Unpacking and Placement ................8 unpacking your Sigma 2200i ..............8 Sigma 2200i placement considerations .............8 warm-up/break-in period ................9 operating voltage ..................9 Rack-Mounting the Sigma 2200i ..............10 Front Panel .....................
Page 5 Network Sources ....................37 Apple AirPlay ....................37 Troubleshooting .....................39 network/streaming troubleshooting ............40 Care & Maintenace ..................42 Specifications ....................43 Dimensions ....................45 Installation Worksheet ..................46...
Page 6: Introduction
Introduction Welcome to the Classé family! Congratulations on your purchase of the Classé Sigma 2200i Stereo Integrated Amplifier. We are sure that you will enjoy it for many years to come. Classé values its relationships with our customers and intend on supplying the highest level of support along with our product.
Page 7: Exceptional Design Features
Exceptional Design Features The Sigma 2200i Stereo Integrated Amplifier is designed for music lovers and AV enthusiasts who want high performance control and amplification from a diverse range audio sources. Its connectivity and processing power accommodate the ever increasing array of music and AV sources, allowing them to be accessed and enjoyed without compromise.
Page 8: Unpacking And Placement
Unpacking and Placement We have taken all precautions, and made every effort to make the Sigma 2200i simple and straightforward to install and use. Still, we recommend that you take a few minutes to review this manual. Even if you are having the integrated amplifier professionally installed, you will want to know how to efficiently operate it to its potential.
Page 9: Warm-Up/Break-In Period
AC power. Make certain that the Sigma 2200i is in Standby prior to disconnecting it. Physically disconnect any and all valuable electronics from AC power during electrical storms.
Page 10: Rack-Mounting The Sigma 2200I
Rack-Mounting the The Sigma 2200i is designed to accommodate rack-mount installation. Sigma 2200i Professional installation by an authorized Classe dealer is recommended. To rack mount the 2200i, remove the two side-panel screws, rotate and flip the side panel to position the rack “ear” along the front of the 2200i and re-install the side-panel screws. Repeat for the side panel on the opposite side. Remove the feet from the bottom of the 2200i.
Page 11: Front Panel
MUTE SIGMA 2200i Front Panel The front panel of the Sigma 2200i is shown above. The numbers in the drawing refer to the descriptions that follow. Standby/On Button and Status Indicator LED Pressing the Standby button toggles the Sigma 2200i between operate and standby mode –...
Page 12: Headphone Jack
When updates are posted in the software downloads section of the Classé web site, they may be loaded onto a USB stick and plugged into the front panel of the Sigma 2200i. When the power is switched on from the rear panel, the update will proceed automatically. Near the end of the update you will be asked to touch the screen in three identified locations for touchscreen calibration.
Page 13: Mute Control
Touchscreen The front panel touchscreen is used for day-to-day operation of the Sigma 2200i. It is also used for setup and to display useful information as required. Mute Control The Mute button reduces the Sigma 2200i volume by a pre-determined amount.
Page 14: Rear Panel
COAX 2 100-120~ T6.3AH 250V 220-240~ T3.15AH 250V Rear Panel The rear panel of the Sigma 2200i is shown above. The numbers in the drawing refer to the descriptions in this section. serial number You’ll find your Sigma 2200i serial number located adjacent to the AC Mains Input connector on the rear panel, as shown in the graphic above. Please record this number for future reference.
Page 15: Hdmi Inputs
Sigma 2200i is installed in a cabinet. Attach this input to an infrared repeater system to route signals from the remote control to the Sigma 2200i via a mono mini- jack (3.5mm phono).
Page 16: Subwoofer Output
Classé dealer for assistance. 10 Analog Audio Inputs - Balanced The Sigma 2200i supports 1pr of XLR type connectors for a balanced analog source. They are labeled R1/L1. NOTE: This input conforms to the AES (Audio Engineering Society) “pin 2 = hot”...
Page 17: Speaker Outputs
Troubleshooting. 14 AC Mains Input An IEC standard power cord (supplied) is used with the Sigma 2200i. Plug the cord into the IEC receptacle on the rear panel and the other end into a suitable wall outlet.
Page 18: The Remote Control
The Remote Control Your Sigma 2200i includes a remote control for the most basic operation of the integrated amplifier and transport control of USB and Network-connected devices. The remote control is shown on the left. The numbers in the drawing refer to the descriptions that follow. Basic Functions The three buttons along the top of the remote control groups the following basic control functions: • Mute reduces the audio output of the Integrated Amplifier to the...
Page 19 Using the Remote and Accessing the Battery The IR Remote ships with a battery already installed. This battery, a CR2032, 3V is covered by a protective film that prevents it from discharging during storage. To use the remote for the first time, open the cover by inserting a large paperclip or similar tool into the hole on the back cover at an angle to depress the button and release the catch.
Page 20: Initial Setup
However, if you can’t wait to get started, this section is designed to assist you in setting up and becoming familiar with the Sigma 2200i hardware. Once the initial setup is complete, be sure to read the rest of this manual to familiarize yourself with the daily operation and customizable features of your Sigma 2200i.
Page 21 See the Menu System section for details. Step 4 If you are using a subwoofer, connect the Sigma 2200i subwoofer output to the input of the designated amplifier or powered subwoofer. NOTE: Make sure connections from the subwoofer output go only to...
Page 22 The physical setup of the Sigma 2200i Integrated Amplifier and system components is complete. Note that putting the Sigma 2200i into standby saves all settings in non- volatile memory. If you should make changes to the setup and remove AC...
Page 23: Using The Sigma 2200I
If more are enabled, they will be available on the next page by touching the button in the upper right corner of the page. See the section on source setup in the Menu System. The Sigma 2200i has up to 18 selectable source buttons which are all interchangeable.
Page 24 (and you have more than nine source buttons enabled), press the button for the next page of sources. Or, press the button to return to the previous page. The Sigma 2200i comes from the factory with thirteen source buttons labeled and enabled. To change the default settings and labels or to disable unused buttons, see the Menu System.
Page 25: The Menu System
Changes are made on-the-fly, which allows you to quickly set up and modify settings without constantly being asked if you’re sure you want to make the change and pressing enter to save. The Sigma 2200i stores settings in non-volatile memory whenever the unit is put into standby, so it’s a good practice to put the unit into standby after you have finished making changes. In normal daily operation this happens anyway, but if you want to be sure a loss of power doesn’t erase your changes,...
Page 26: Source Setup
• teach IR commands Source Setup Each of the 18 source buttons supported by your Sigma 2200i can be customized in several ways to enhance system performance and/or to simplify operation. The source select page is dynamic in that it shows up to nine sources on a single page.
Page 27: Source Name
There can be significant differences in output levels, especially among analog sources, which can lead to unexpected changes in volume when switching among them. The Sigma 2200i provides an input offset adjustment range from -10 to +10 dB. Configuration Setup The Configuration Setup page allows you to define outputs for up to six different speaker configurations. Touch the button for the specific configuration...
Page 28: Configure Outputs
On Screen Display.. Brightness The Brightness setting of the Sigma 2200i touchscreen has three possible values: low, medium, and high. Select the setting you prefer. A high brightness setting usually works best in brightly-lit rooms; you may find that a lower setting is less...
Page 29: Timeout
After three seconds of inactivity on your part, the backlight extinguishes itself, essentially turning off the touchscreen. If you prefer the display of the Sigma 2200i to remain on whenever not in Standby mode, select the Never timeout option. The lamp in the touchscreen display is designed for harsh automotive environments and will give you many years of reliable operation.
Page 30: Max Volume
Using the volume knob, enter that value on the Max Volume page. Startup Volume Touching the Startup Volume button allows you to set up a preferred volume level for when the Sigma 2200i wakes out of standby. • The factory default is for a startup volume set to -30.0.
Page 31: Mute Setup
Mute Setup The Mute Setup page allows you to choose how the Mute button functions. The options for mute control are: • specific - allows you to select the exact value to which the volume is attenuated. If the current volume is already below that level when muting is engaged, the volume remains unchanged.
Page 32: Tone Control Setup
You do not need to have all or even any filters enabled for a given channel. The installer need only make the adjustments to the channel(s) necessary to correct for the room’s interaction. We encourage you to consult with your authorized Classé dealer to properly calibrate the Parametric EQ function. NOTE: a discrete IR command or Fkey may be used to toggle the EQ on and off to easily compare before and after from the listening position.
Page 33: Network Setup
Network Setup The Network Setup page displays the IP address of the Sigma 2200i and the Network status. Pressing the Restore Network Defaults button on this page re-enables DHCP mode. In DHCP mode the Sigma 2200i obtains an IP address from a device on the Network (usually the Wireless AP). UKEC version units (220-230V units), when in standby, will not respond to commands from control interfaces via the Network such as CAN Bus, RS-232, IP Control and the Classé App. Contact your dealer to determine the Wake on Network setting or other means of bringing your unit out of standby. In...
Page 34: Remote Fkeys
Fkey to perform. Although the remote control is limited to three Fkeys, the Sigma 2200i can respond to as many as eight different Fkey commands. Certain other Classé remote controls and aftermarket learning remotes are capable of utilizing these additional commands.
Page 35: Teach Ir
The Teach IR page displays a scrolling list of all the available IR codes in the Sigma 2200i. Simply scroll to the command you want your macro-capable remote to learn and touch the Send IR Code button. The Sigma 2200i continuously sends that command code via the front panel - as long as the button is pressed – until your third-party remote control has learned it.
Page 36: Balance
To compensate for this, play a simple vocal recording and put the Sigma 2200i in Mono (press Menu, then Mono). Open the Balance control page and using the remote, adjust the balance until the sound image is perfectly centered.
Page 37: Network Sources
Ethernet connection because it provides a more reliable and higher speed connection than is typically available over WiFi. If it is not possible or practical to run a direct Ethernet connection from your router to the Sigma 2200i, various solutions are available. A powerline Ethernet adaptor, such as those offered by Netgear and others may be used or a wireless bridge such as Apple’s...
Page 38 The Sigma 2200i display will show the status of the audio stream, so when using AirPlay, it will show the sampling frequency of the signal as well as its format (ALAC is the format AirPlay streams use). You may adjust the volume in iTunes or if using Apple’s free Remote App, change volume and choose and...
Page 39: Troubleshooting
AC cord is positioned firmly in the AC mains receptacle in the rear. P If the Sigma 2200i is properly plugged in and the power from the electrical outlet is at the proper level, try the following: Put the Sigma 2200i in Standby mode and unplug the unit for at least thirty seconds.
Page 40: Network/Streaming Troubleshooting
DLNA Media Player. P Restart all participating components one at a time until the problem is resolved. First the media player, then the Sigma 2200i (cycle the power off and on) and then your router. If the problem persists verify that you have a valid IP address. If your address is “Limited Auto IP”...
Page 41 A higher-performance router may be required. The Sigma 2200i sometimes turns itself on unexpectedly. P This is likely caused by “sounds” (e.g. mouse clicks, new mail notifications, etc.) generated by your computer activating the auto select feature for your Network connection. Disable the...
Page 42: Care & Maintenace
Dampen the cloth with alcohol first and then lightly clean the surface of the Sigma 2200i with the cloth. Do not use excessive amounts of alcohol that might drip off the cloth and into the Surround Sound Processor.
Page 43: Specifications
Specifications All specifications are accurate at the time of printing. Classé reserves the right to make improvements without notice. n USB audio up to 24-bit/192 kHz n USB (Host) charging capability 2.0 Amps n AirPlay supported formats AAC (8 to 320 Kbps), Protected AAC (from iTunes Store), HE-AAC, MP3 (8 to 320 Kbps), MP3 VBR, Audible (formats 2, 3, 4, Audible Enhanced Audio, AAX, and AAX+), Apple Lossless, AIFF, and WAV...
Page 44 Continued Made for: iPod touch (5th generation) Made for: iPhone 6 Made for: iPad Air 2 AirPlay: AirPlay works with iPhone, iPod, and iPod touch with iOS 4.3.3 or later, Mac with OS X Mountain Lion, and Mac and PC with iTunes 10.2.2 or later. For more information, see your Classé dealer, or contact: B&W Group Ltd.
Page 45: Dimensions
Dimensions 17.00” (433.00) 5.25” 5.53” (133.35) (140.35) 17.00” (433.00) 13.39” (340.00) 2.10” (53.59) 9.65” (245.80) 14.57” (370.00) 15.53” (394.55)
Page 46: Installation Worksheet
Installation Worksheet Source: ______________________________________________________________ Connector(s): _________________________________________________________ Input: _______________________________________________________________ Source: ______________________________________________________________ Connector(s): _________________________________________________________ Input: _______________________________________________________________ Source: ______________________________________________________________ Connector(s): _________________________________________________________ Input: _______________________________________________________________ Source: ______________________________________________________________ Connector(s): _________________________________________________________ Input: _______________________________________________________________ Source: ______________________________________________________________ Connector(s): _________________________________________________________ Input: _______________________________________________________________ Source: ______________________________________________________________ Connector(s): _________________________________________________________ Input: _______________________________________________________________ Source: ______________________________________________________________ Connector(s): _________________________________________________________ Input: _______________________________________________________________...
Page 48 B&W Group Ltd. 5070 François Cusson Lachine, Quebec Canada H8T 1B3 +1 (514) 636-6384 +1 (514) 636-1428 (fax) http://www.classeaudio.com North America: (514) 636-6384 email: cservice@classeaudio.com Europe: 44 (0) 1903 221 700 email: classe@bwgroup.com Asia: (852) 2790 8903 email: classe@bwgroup.hk All Others: +1 514 636 6384 email: cservice@classeaudio.com Copyright ©...