Summary of Contents for Cargo 160793
- Page 1 160793 160793 Automotive components since 1963 Multimedia Rear-View Mirror USER MANUAL Vedpak 141GB_Version 2_22.10.09 Vedpak 141GB_Version 2_22.10.09...
-
Page 2: Safety Instructions
160793 Safety instructions 6. Do not cover with other devices. 7. If liquid gets into the unit case, disconnect the unit from power supply and have it checked by your 1. Read the instructions carefully before installation, to dealer before re-using to avoid the danger of electric avoid damages caused by incorrect operation. - Page 3 160793 Electronic Rear View Mirror 4. Red/Green LED indicating power ON / OFF and function switch. The Multimedia Rear View Mirror is a 4.4” LCD color 5. Auxiliary power switch for manually turning electronic monitor, which enables consumers to view objects behind image of AV1 or AV2.
-
Page 4: Control Box
160793 Control Box 8. Audio output 1 and Video output 1: The image of 4.5” LCD can be output through AV output 1. Therefore, DVR needed to connect to AV 1. Mirror or non mirror function switch for CCD output 1 if necessary. - Page 5 160793 Power Supply Wire 4. Green wire: Link to the handbrake (÷) so that AV input signal can be shown in the monitor while parking. Power supply wire: link to ignition switch. 5. Brown wire: Link to the reversing light so that the mirror monitor is automatically on while reversing.
-
Page 6: Installation Procedures
160793 INStALLAtIoN PRoCEdURES 1. Installing electronic rear view mirror. A. Insert the fastening strap into the raised groove on the back cover of the mirror in the direction indicated in the picture below, ensuring that the side of the strap with the two notches feces outwards, and the indented side inwards. - Page 7 160793 C. Attaching onto the original rear view mirror in the described in step B, so that the electronic rear view vehicle (as illustrated below). Put the side of the mirror is mounted on the original rear view mirror. electronic rear view mirror with connected trap to one...
- Page 8 160793 2. Installing control box. 3. Installing CCd camera. A. Connect the Male D-Type (15 pin) system cable end plug A. Mount the bracket firmly on an appropriate place on linked with the rear-view mirror to the corresponding the vehicle.
-
Page 9: Description Of Functions
160793 dESCRIPtIoN of fUNCtIoNS How to play on-board VCd/dVd/GPS/tV. turn oN/off. A. Make sure the green line is connected with handbrake A. Turn the ignition switch to on, (it is preferably to start the line in order to have video display only in brake mode. - Page 10 160793 MULtIMEdIA REAR-VIEW MIRRoR SYStEM SPECIfICAtIoN A. Control box Total I/O terminal: AV IN *2 (For DVD player or TV tuner. AV Out *2 (For DVR * 1 and other monitors* 1). CCD IN * 2. Display OUT * 1 (for the driver).
- Page 11 160793 B. Electronic rear mirror. C. Audio power output: 1. Power output: < 0.5 W x 2 (8Ω speaker), < 10% THD. A. Input connector: D-SUB 15P (Male) with 3.6 mtr.cable, for connect to 2. Audio L/R channel balance: < 3 dB.
-
Page 12: Extra Equipment
• Protection degree IP67. • 21 x 40 mm. trailer kit. Cargo 160663 3.5 mtr. coiled cable ext. length. Extension cable: Cargo 160672 ..6 mtr. Cargo 160613 ..10 mtr. Cargo 160612 ..15 mtr. Cargo 160611 ..20 mtr. Vedpak 141GB_Version 2_22.10.09...
Need help?
Do you have a question about the 160793 and is the answer not in the manual?
Questions and answers