•
Stainless Top Plate / Tempered Glass
Installation on the table.
Pemasangan pada meja.
Meja
•
This gas cooker can be also use on top of the table. First, unfasten all 4 screws that fit at bottom side
of the casing using a screw driver (after that, screws are no longer in use). Then, set rubber legs into
the screw holes (see figure below).
Kompor gas ini dapat juga digunakan di atas meja. Lepas ke-4 screw yang terpasang pada bagian
bawah casing dengan menggunakan obeng (+) (setelah itu, screw tidak digunakan lagi). Lalu,
pasang kaki (rubber leg) pada lubang screw tersebut (lihat gambar di bawah ini).
SCREW
SCREW
SCREW
Caution for the
glass /
tempered
Perhatian untuk tempered glass
•
Never use oversized cooking utensils or overload the cooking appliances.
Jangan memakai alat-alat memasak yang berukuran besar atau berat pada
kompor.
•
Do not remove the pan support and enclose the burner with a wok stand as this
will concentrate and deflect the heat onto the gas hob.
Jangan melepas pan support dan menutupi burner dengan dudukan
penggorengan karena dapat mengakibatkan penumpukan dan pembelokan
panas ke kompor.
•
Do not place anything, e.g., flame tamer, asbestos mat between pan and pan
support as serious damage to appliance may result.
Jangan meletakan benda seperti, penutup api, tatakan asbes diantara panci dan
pan support karena dapat merusak kompor.
RB2RHS-165-1x01
Casing Screw Casing
SCREW
PT. RINNAI INDONESIA
Tangerang - Indonesia
LAYANAN BEBAS PULSA: 0800-1-889-889
SMS Center : 0815-112-99999
http://www.rinnai.co.id
INSTRUCTION MANUAL
PETUNJUK PEMAKAIAN
MODEL: RB-2AS
RB-2AG
TWO-BURNERS GAS COOKER
KOMPOR GAS DUA TUNGKU
NOMOR TANDA PENDAFTARAN
DIRJEN PDN NO: P.45.RI8.00301.0310
Need help?
Do you have a question about the RB-2AS and is the answer not in the manual?
Questions and answers