Func. Setting; Smart Energy Saving - LG 19M37A Owner's Manual

24
CUSTOMIZING SETTINGS
FUNC. Setting
SMART ENERGY SAVING
1
Press FUNC. button on the bottom of the Monitor set to
display the FUNC. OSD.
2
Enter to SMART ENERGY SAVING by pressing the ▼
button.
3
Set the options by pressing the ◄ or ► buttons.
4
Select EXIT to leave the OSD menu.To return to the
upper menu or set other menu items, use the up arrow
( ) button.
Each option is explained below.
SMART ENERGY SAVING
High
Low
Off
NOTE
TOTAL POWER REDUCTION: How much power is saved while using the monitor.
y y
TOTAL CO2 REDUCTION: Change the TOTAL POWER REDUCTION to CO2.
y y
SAVING DATA(W/h)
y y
SMART SAVING (High)
SMART SAVING (Low)
Saving Data depends on the Panel. So,those values should be different from each panel and panel
y y
vendor.If option of SMART ENERGY SAVING is High or Low, monitor luminance become higher or
lower depend on source.
LG calculated these values by using "broadcast video signal"
y y
(including broadcast video: IEC 62087)
SMART SAVING refers to how much power can be saved using the SMART ENERGY SAVING
y y
function.
If option of SMART ENERGY SAVING is High or Low, Picture Mode will automatically be Custom and
y y
Reader Mode and Color Wizard will automatically be Off.
Enables SMART ENERGY SAVING you can save energy with this energy- high efficient function.
Enables SMART ENERGY SAVING you can save energy with this energy- low efficient
function.
Disables SMART ENERGY SAVING .
470 mm 494 mm
(18.5 inch) (19.5 inch)
2 W/h 3 W/h
1 W/h 1 W/h
Description
546 mm 600 mm
(21.5 inch) (23.6 inch)
4 W/h 4 W/h
2 W/h 2 W/h
685 mm
(27 inch)
6 W/h
3 W/h