Page 1
By AMIRIDIS – SAVVIDIS S.A. DIGITAL MP3 PLAYER User Guide MP5918/MP5928 MP471SL/MP472BL/MP473PK MP591SL/MP592BL/MP593PK MP383PK Ver. 7 Page 1...
This MP3 is supporting MP3, WMA, or WAV files. Its perfect tone in high reliability with refined exterior design brings you an ultra performance. Overview ●Refined exterior design Unique design fits for hand. ●Multi file format support This player recognizing MP1, MP2, MP3, WMA, WMV and WAV files. ●Firmware upgrade available You can download upgrade software from internet enhancing player’s function.
Displayer Battery Level The player shows capacity in 4 levels Battery is full on 1.5V. As time goes on, capacity indication will monish. Indicator shows blank when battery almost ran out. You should charge your battery at that time. Please switch on the player before charge.
Page 6
Play Voice Mode: Radio: Settings: Telephone: E-Documents: USB Mode (Connect to PC): Page 6...
Volume Adjust Push VOL to access volume adjust, press Next/Last to increase or decrease volume. Switch on/off Press and hold play to switch on when the player is off. Press and hold play to switch off when the player is on. ...
3. Push Next choosing Equalizer Mode; 4. Press Mode to entry ‘Equalizer Mode’ submenu. Select an equalizer: 5. Detail of each equalizer (EQ): Natural Rock Classical Soft Jazz 6. Push Next to select an EQ and press Mode to confirm. ...
2. Push Next scroll to Record mode 3. Push Mode to select Record mod, screen will display as below: 4. Press Play to start recording. Select Record Type 1. When in the interface of ‘Record stop’ 2. Press Mode to entry record submenu 3.
Press the button to try the next FM frequency forwards 6. Save Radio Station Press the “Mode” button enter the “FM” submenu Press the “Mode” button to save this radio station. 7. To choose the previously saved radio station Press the “Play/Pause” button to select and listen to the saved radio station. 8.
for listening music before sleep. Please note: Sleep mode valid only once after setting, you have to set again if you want to use it next time. ○’Contrast Adjust’ Please consult into ‘Backlight time setting’ ○’Memory status’ You can check total memory space and the percentage of usage. ○’Firmware version’...
The player is also a standard USB disk. Supported by Windows98 (drivers needed), Windows 2K or above (no need for drivers), Mac OS 10.3, Red hat Linux 8.0 or above. The player supports USB power supply, can be used without battery when connected to PC. To entry, when on 在’waiting mode’...
2. While upgrade successful, the player will display like this: Firmware upgrade is to improve player’s performance; you can still use it normally without doing upgrade process Player may not work by incorrect process! Please read this manual carefully before doing upgrade process.
Page 14
1. When stopped 2. Press Mode to entry Stop submenu Press Mode entry folder 4. Press Next or Last to choose a choosing interface folder 5. Press Mode to entry the selected folder Please note: You can set folders independently in Music / Recorder / Play mode ...
About 22g Screen Matrix (128*64) Liquid Crystal Connect to PC High Speed USB2.0 Memory MP383PK=1GB MP471SL/MP472BL/MP473PK=2GB MP591SL/MP592BL/MP593PK=4GB MP5918/MP5928= 8GB Power Supply Max 5 hours play mode Sample rate 8KHz Voice Recorder Format WAV (32K bps), ACT (8K bps) Page 15...
Need help?
Do you have a question about the MP5918 and is the answer not in the manual?
Questions and answers