Specifications - Nova Electronics SuBPilot User Manual

On/off LED indicator.
SUBPILOT has two VU-meter on hand to monitor the overall sound
level of the device.
SUBPILOT operated with a internal lithium-iron-Polymer (LiFePo4) high
efficiency battery. Recharging takes place with a power supply
supplied which must be connected to dedicated charger (7). This
connector has a bayonet fitting that does not allow errors polarity. It' s
RED color for easy identification and is IP68.
DON' T DO DO DO N' T N' T INSERT METAL OBJECTS IN THE CONNECTOR TO PREVENT SHORT N' T INSERT METAL OBJECTS IN THE CONNECTOR TO PREVENT SHORT INSERT METAL OBJECTS IN THE CONNECTOR TO PREVENT SHORT INSERT METAL OBJECTS IN THE CONNECTOR TO PREVENT SHORT
CIRCUITS TO INTERNAL BATTERY OR ELECTRIC SHOCK. CIRCUITS TO INTERNAL BATTERY OR ELECTRIC SHOCK. CIRCUITS TO INTERNAL BATTERY OR ELECTRIC SHOCK. CIRCUITS TO INTERNAL BATTERY OR ELECTRIC SHOCK.
18
5. LED INDICATOR
6. VU-METER
7. CHARGE CONNECTOR
SYSTEM
PEAK POWER:
RMS POWER:
FREQUENCY RESPONSE:
DISTORTION:
SENSIBILITY
OPERATION TEMPERATURE:
DIMENSIONS (l x h x p):
WEIGHT:
BATTERY TYPE:
CYCLE:
CUTOFF:
GHARGER:
BATTERY AUTONOMY:
CHARGING TIME:
19

SPECIFICATIONS

Active
300 W –SPEAKON Outputs
160 W – SPEAKON Outputs
(40 W for each output)
20 – 20.000 Hz
0,5% - 140 W
98 dB W/m
0-40 °C
550 x150 x 620 mm
6 Kg
14,6V-20A Lithium-Iron-
Polymers (LiFePo4) with BMS
1500
80%
15,3V-6A electronic
12-14 Hours
5-6 Hours (including cells
balancing)