This Self-EDID programming feature AC/DC Power Adapter Technical Advisory makes the installation of M1-3R2VI-DU easier and more flexible at any variable Direct DDC: One power adaptor is required to supply power to both resolution display systems.
Installation – Direct DDC Step 4 (Use this menu when DDC through CAT5e) Remove the module dust covers and connect each duplex LC fiber cable one by one to each of 4 LC receptacles of the Transmitter and Receiver boxes, as shown Important: Please use the installation procedure below.
Installation – Virtual DDC Step 3 (Use this menu without DDC through CAT5e) Check that the transmitter and receiver are turned off and connect the upstream Transmitter box to the DVI receptacle of PC by one dual link DVI Important: Please use the installation procedure below. Improper or no copper cable in the shipping group.
M1-3R2VI-DU Optical Dual Link DVI Module Check that all AC and DC plugs and jacks used by external power • supplies (both Opticis and others) are firmly connected. Ensure that power is turned on. • Fully backward compatible with DVI standard: supports DVI 1.0, Ensure that the Tx and Rx boxes plug correctly to the PC and display, •...
1 (One) Year Warranty This device complies with part 15 of FCC Rules. Operation is subject to the Opticis warrants this optical dual link DVI module to be free from defects in following two conditions: (1) this device may not cause harmful interference,...
Page 7
462-120, South Korea Tel: +82 (31) 737-8033 Tel: +1 (519) 355-0819 Fax: +82 (31) 737-8079 Fax:+1 (519) 355-0520 For order support, please contact your Distributor or Reseller. For technical support, check with the Opticis web site www.opticis.com or contact techsupp@opticis.com...