Lincaround Sm; Channels And Codes - Motorola i870 User Manual

LINCaround SM
Note: When switching from the network to
LINCaround, the last channel and code
that were set appear on the LINCaround
idle screen.
While in LINCaround, this icon M appears on the
display, indicating that there is no network signal
and LINCaround is active.
Exiting LINCaround
To set your phone to network mode when
LINCaround is active:
1 From the LINCaround idle screen, press m.
2 Scroll to LA Options and press O.
3 Select Exit LINCaround.
Tip: You can also exit LINCaround from the
LINCaround idle screen by pressing e for 3
seconds.
Switching to Network Please Wait displays. After
a few seconds, the network idle screen appears.
Talk Range
Phones used in LINCaround mode should be a
minimum of 6 feet apart to maximize performance
and improve transmission range.
26

Channels and Codes

Your phone has 10 channels and 15 codes.
Channels are divided into sets of frequencies that
allow you to make and receive LINCaround calls.
Other parties may also be talking on the same
channel.
Codes help minimize interference from unwanted
messages and other disturbances when you are on
the same channel as others.
To have a conversation, all parties must be on the
same channel and code. For private LINCaround
calls, the person you are calling must be in
LINCaround and set to the same channel to
receive your call.
Note: When making a code call, all parties that
are on your code and channel can hear
your conversation.
To set a channel:
1 From the LINCaround idle screen, press A
under Edit.
2 Scroll to Channel.
3 Press A under Edit.
4 Select a channel.
5 When you are finished, press A under Back to
return to the LINCaround idle screen.