Motorola i776 User Manual page 69

4. Select .
Code
5.
Select a code.
6. Press (right softkey) to return to the Direct Talk
Back
standby screen.
Making and Receiving Code Calls in Direct Talk
Mode
To make a Code call using Direct Talk:
In Direct Talk mode, press and hold the Direct
Connect button. Your phone displays
along with the channel and code selected.
The tone emitted from your phone when making a
Direct Talk call is four beeps and sounds different from
the tone heard on Direct Connect calls conducted on
the network.
If you receive an error message, this means:
There may be no parties on your channel or code.
You are out of range.
When you receive a Code call using Direct Talk, your
phone displays
Receiving
Transmitting
, along with the channel and
code selected. Answer a Direct Talk Code call just like
you would any other Direct Connect call.
Private Direct Talk Calls
Private Direct Talk allows you to silence all the calls on
a channel that are not directed specifically at you. To
do this, you must first set your phone to Private Only.
To set your phone to Private Only:
1.
In Direct Talk mode, press
2.
Select .
Code
,
3. Select .
Pvt Only
4.
Press (right softkey) to return to the Direct Talk
Back
standby screen.
To reach you, other Direct Talk callers must be on your
same channel and dial your ten-digit wireless phone
number to reach you.
Section 2A. Making and Answering Calls
(left softkey).
Edit
57