Peavey Vypyr Sanpera Pro Manual

Download this manual

ENGLISH

Vypyr® Sanpera® Pro

Footcontroller for Vypyr Pro Series Amplifier

Featuring direct access to all 4 model locations, plus delay and reverb, the Sanpera Pro unlocks all the power of

your Vypyr Pro. The dual expression pedals can be assigned to either the default setting (volume on left, wah on

right) or assigned to an alternate effect, for instance pitch control, or rotary speaker speed. There are also looper

controls that will allow you to create multi-track loops. The Sanpera Pro also includes a boost switch, tap tempo

and access to the chromatic tuner.

KEY FEATURES:

• 2 expression pedals

• Direct access to all 4 models, plus delay and reverb

• Boost switch

• Tap Tempo

• Chromatic tuner

• Full looper controls

• Presets arranged in banks of 4, up to 400 presets!

• Self powered via Vypyr amplifier

• MIDI output for connecting to AT200-B Breakout box (for controlling the AT-200 guitar)

Page 1 ENGLISH Vypyr® Sanpera® Pro Footcontroller for Vypyr Pro Series Amplifier Featuring direct access to all 4 model locations, plus delay and reverb, the Sanpera Pro unlocks all the power of your Vypyr Pro. The dual expression pedals can be assigned to either the default setting (volume on left, wah on right) or assigned to an alternate effect, for instance pitch control, or rotary speaker speed.
Page 2 Top Panel Left Rocker Pedal The default setting for this pedal is for a volume control, but it can be programmed to control any parameter. Booster Switch Provides a clean boost to the instrument signal path. Tap Tempo Tapping this switch will allow you to set the tempo of the delay effect. Holding the switch down will activate the onboard tuner.
Page 3 Top Panel continued Delay and Reverb Engage Switches These switches turn the delay and reverb effects of the VYPYR PRO on and off. Rear Panel Footswitch MIDI Connectors *Footswitch (Control to Amplifier)– connects the Sanpera to the VYPYR Amplifier *MIDI OUT– connects to AT200-B Breakout box (for controlling the AT-200 guitar)
Page 4 Looper Function To operate the looper for the Sanpera® Pro, simply press the REC/PLAY switch and begin playing. To end record- ing simply press REC/PLAY again. The recorded loop will automatically start playing once recording has ended. You can wait as long as you want to remove the last overdub - as long as the looper is still playing and you have not started a new overdub.