Using A Headset; Attaching A Headset; Using A Remote Boost Walkie-Talkie Button - Motorola i455 User Manual

Using a Headset

If you use a headset or similar device with your
phone, you can set your phone to send incoming
sound to the headset only, or to the headset and
the speaker at the same time:
1 From the main menu, select Settings >
Advanced > Headset/Spkr.
2 Select HdsetOnly to send incoming sound to
the headset only. -or-
Select Hdset&Spkr to send incoming sound to
the headset and ring tones to the speaker.
Note: If you are using your phone with a
headset, and you have the Flip to End
option set to On, closing your flip sends
incoming sound to the headset and does
not end the call. See "Setting Flip Actions"
on page 47.

Attaching a Headset

1 Lift the audio jack cover.
2 Insert the headset connector firmly into the
audio jack. You may have to rotate the headset
connector until it fits securely into the audio jack.
136
Using a Remote Boost
Walkie-Talkie Button
If you are using a headset or other accessory with
a remote Boost TM walkie-talkie button, you can use
the remote Boost walkie-talkie button for phone
TM
calls and Boost walkie-talkie calls.
TM
For phone calls, use the remote Boost
walkie-talkie button to answer calls, switch
between calls, and end calls. Hold the remote
Boost TM walkie-talkie button for less than 2
seconds to answer calls and switch between calls.
Hold the remote Boost
more than 2 seconds to end calls.
For Boost walkie-talkie calls, use the remote
TM
Boost TM walkie-talkie button as you would the
Boost walkie-talkie button on your phone.
TM
TM
TM
walkie-talkie button for
TM